Diese Befehle sind für die Counter-Strike: Global Offensive Console in-game. Und auch für CS:S

Die Console können Sie mithilfe der Steam Bilbiothek – Counter-Strike: Global Offensive (Rechtsklick) – Eigenschaft – Start optionen festlegen: -console, aktivieren.

+demoui2 // Bring the advanced demo player UI (demoui2) to foreground.
+posedebug // Turn on pose debugger or add ents to pose debugger UI
-demoui2 // Send the advanced demo player UI (demoui2) to background.
-posedebug // Turn off pose debugger or hide ents from pose debugger UI
achievement_debug „0“ // Turn on achievement debug msgs.
achievement_disable „0“ // Turn off achievements.
addip // Add an IP address to the ban list.
adsp_debug „0“
ainet_generate_report // Generate a report to the console.
ainet_generate_report_only // Generate a report to the console.
air_density // Changes the density of air for drag computations.
ai_clear_bad_links // Clears bits set on nav links indicating link is unusable
ai_debug_los „0“ // itl
ai_debug_node_connect // Debug the attempted connection between two nodes
ai_debug_shoot_positions „0“
ai_disable // Bi-passes all AI logic routines and puts all NPCs into their idle animations. Can be used to get NPCs out of your way and to t
ai_drawbattlelines „0“
ai_drop_hint // Drop an ai_hint at the players current eye position.
ai_hull // Controls which connections are shown when ai_show_hull or ai_show_connect commands are used Arguments: NPC name or classname,
ai_next_hull // Cycles through the various hull sizes. Currently selected hull size is written to the screen. Controls which connections are
ai_nodes // Toggles node display. First call displays the nodes for the given network as green objects. Second call displays the nodes a
ai_report_task_timings_on_limit „0“
ai_resume // If NPC is stepping through tasks (see ai_step ) will resume normal processing.
ai_setenabled // Like ai_disable but you manually specify the state (with a 0 or 1) instead of toggling it.
ai_set_move_height_epsilon // Set how high AI bumps up ground walkers when checking steps
ai_show_connect // Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre
ai_show_connect_crawl // Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre
ai_show_connect_fly // Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre
ai_show_connect_jump // Displays the allowed connections between each node for the currently selected hull type. Hulls are color code as follows: Gre
ai_show_graph_connect // Toggles graph connection display for the node that the player is looking at. Nodes that are connected to the selected node by
ai_show_grid // Draw a grid on the floor where looking.
ai_show_hints // Displays all hints as small boxes Blue – hint is available for use Red – hint is currently being used by an NPC Orange –
ai_show_hull // Displays the allowed hulls between each node for the currently selected hull type. Hulls are color code as follows: Green –
ai_show_node // Highlight the specified node
ai_show_visibility // Toggles visibility display for the node that the player is looking at. Nodes that are visible from the selected node will be d
ai_step // use ai_step again. To resume processing no
ai_test_los // Test AI LOS from the players POV
ai_think_limit_label „0“
ai_vehicle_avoidance „1“
alias // Alias a command.
ammo_338mag_max „30“
ammo_357sig_max „52“
ammo_45acp_max „100“
ammo_50AE_max „35“
ammo_556mm_box_max „200“
ammo_556mm_max „90“
ammo_57mm_max „100“
ammo_762mm_max „90“
ammo_9mm_max „120“
ammo_buckshot_max „32“
ammo_decoy_max „1“
ammo_flashbang_max „1“
ammo_hegrenade_max „1“
ammo_molotov_max „1“
ammo_smokegrenade_max „1“
askconnect_accept // Accept a redirect request by the server.
asw_engine_finished_building_map // Notify engine that weve finished building a map
audit_save_in_memory // Audit the memory usage and files in the save-to-memory system
autobuy // Attempt to purchase items with the order listed in cl_autobuy
autosave // Autosave
autosavedangerous // AutoSaveDangerous
banid // Add a user ID to the ban list.
banip // Add an IP address to the ban list.
benchframe // Takes a snapshot of a particular frame in a time demo.
bench_end // Ends gathering of info.
bench_showstatsdialog // Shows a dialog displaying the most recent benchmark results.
bench_start // Starts gathering of info. Arguments: filename to write results into
bench_upload // Uploads most recent benchmark stats to the Valve servers.
bind // Bind a key.
BindToggle // Performs a bind <key> increment var <cvar> 0 1 1
bind_osx // Bind a key for OSX only.
bink_dump_precached_movies // Dumps information about all precached Bink movies
blackbox_dump // Dump the contents of the blackbox
blackbox_record // Record an entry into the blackbox
bot_add // bot_add <t|ct> <type> <difficulty> <name> – Adds a bot matching the given criteria.
bot_add_ct // bot_add_ct <type> <difficulty> <name> – Adds a Counter-Terrorist bot matching the given criteria.
bot_add_t // bot_add_t <type> <difficulty> <name> – Adds a terrorist bot matching the given criteria.
bot_all_weapons // Allows the bots to use all weapons
bot_autodifficulty_threshold „0“ // Percentage of Contribution Score that a bot must be outside of to change its difficulty (i.e. Contrib Score in the range [human
bot_chatter „0“ // or normal.
bot_crouch „0“
bot_debug „0“ // For internal testing purposes.
bot_debug_target „0“ // For internal testing purposes.
bot_defer_to_human „0“ // the bots will not do the scenario tasks.
bot_difficulty „1“ // 3=expert.
bot_dont_shoot „0“ // bots will not fire weapons (for debugging).
bot_freeze „0“
bot_goto_mark // Sends a bot to the marked nav area (useful for testing navigation meshes)
bot_goto_selected // Sends a bot to the selected nav area (useful for testing navigation meshes)
bot_join_after_player „1“ // bots wait until a player joins before entering the game.
bot_join_team „0“ // or CT.
bot_kick // matching the given criteria.
bot_kill // matching the given criteria.
bot_knives_only // Restricts the bots to only using knives
bot_loadout „0“ // bots are given these items at round start
bot_mimic „0“
bot_mimic_yaw_offset „180“
bot_pistols_only // Restricts the bots to only using pistols
bot_place // bot_place – Places a bot from the map at where the local player is pointing.
bot_quota „0“ // Determines the total number of bots in the game.
bot_quota_mode „0“ // Determines the type of quota. Allowed values: normal, fill, and match. If fill, the server will adjust bots to keep N p
bot_randombuy „0“ // should bots ignore their prefered weapons and just buy weapons at random?
bot_show_battlefront „0“ // Show areas where rushing players will initially meet.
bot_show_nav „0“ // For internal testing purposes.
bot_show_occupy_time „0“ // Show when each nav area can first be reached by each team.
bot_snipers_only // Restricts the bots to only using sniper rifles
bot_stop „0“ // immediately stops all bot processing.
bot_stop_control // Release control of a bot.
bot_take_control // Take control of a bot.
bot_traceview „0“ // For internal testing purposes.
bot_zombie „0“ // bots will stay in idle mode and not attack.
box // Draw a debug box.
buddha // Toggle. Player takes damage but wont die. (Shows red cross when health is zero)
budget_averages_window „30“ // number of frames to look at when figuring out average frametimes
budget_background_alpha „128“ // how translucent the budget panel is
budget_bargraph_background_alpha „128“ // how translucent the budget panel is
budget_bargraph_range_ms „16“ // budget bargraph range in milliseconds
budget_history_numsamplesvisible „100“ // number of samples to draw in the budget history window. The lower the better as far as rendering overhead of the budget panel
budget_history_range_ms „66“ // budget history range in milliseconds
budget_panel_bottom_of_history_fraction „0“ // number between 0 and 1
budget_panel_height „384“ // height in pixels of the budget panel
budget_panel_width „512“ // width in pixels of the budget panel
budget_panel_x „0“ // number of pixels from the left side of the game screen to draw the budget panel
budget_panel_y „50“ // number of pixels from the top side of the game screen to draw the budget panel
budget_peaks_window „30“ // number of frames to look at when figuring out peak frametimes
budget_show_averages „0“ // enable/disable averages in the budget panel
budget_show_history „0“ // turn history graph off and on. . good to turn off on low end
budget_show_peaks „1“ // enable/disable peaks in the budget panel
budget_toggle_group // Turn a budget group on/off
bug // Show the bug reporting UI.
bugreporter_uploadasync „0“ // Upload attachments asynchronously
bugreporter_username „0“ // Username to use for bugreporter
bug_swap // Automatically swaps the current weapon for the bug bait and back again.
buildcubemaps // Rebuild cubemaps.
buildmodelforworld // buildmodelforworld
buymenu // Show or hide main buy menu
cache_print // cache_print [section] Print out contents of cache memory.
cache_print_lru // cache_print_lru [section] Print out contents of cache memory.
cache_print_summary // cache_print_summary [section] Print out a summary contents of cache memory.
camortho // Switch to orthographic camera.
cam_collision „1“ // an attempt is made to keep the camera from passing though walls.
cam_command // Tells camera to change modes
cam_idealdelta „4“ // Controls the speed when matching offset to ideal angles in thirdperson view
cam_idealdist „150“
cam_idealdistright „0“
cam_idealdistup „0“
cam_ideallag „4“ // Amount of lag used when matching offset to ideal angles in thirdperson view
cam_idealpitch „0“
cam_idealyaw „0“
cam_showangles „0“ // print viewangles/idealangles/cameraoffsets to the console.
cam_snapto „0“
cast_hull // Tests hull collision detection
cast_ray // Tests collision detection
cc_emit // Emits a closed caption
cc_findsound // Searches for soundname which emits specified text.
cc_flush // Flushes asyncd captions.
cc_lang „0“ // Current close caption language (emtpy = use game UI language)
cc_linger_time „1“ // Close caption linger time.
cc_predisplay_time „0“ // Close caption delay before showing caption.
cc_random // Emits a random caption
cc_showblocks // Toggles showing which blocks are pending/loaded async.
cc_subtitles „0“ // wont help hearing impaired players).
changelevel // Change server to the specified map
changelevel2 // Transition to the specified map in single player
chet_debug_idle „0“ // many debug prints to help track down the TLK_IDLE issue. Set two for super verbose info
ch_createairboat // Spawn airboat in front of the player.
ch_createjeep // Spawn jeep in front of the player.
clear // Clear all console output.
clear_anim_cache // freeing the memory (until the next time a streaming animblock is requested).
clear_debug_overlays // clears debug overlays
clientport „27005“ // Host game client port
closecaption „0“ // Enable close captioning.
cl_allowdownload „0“ // Client downloads customization files
cl_allowupload „0“ // Client uploads customization files
cl_animationinfo // Hud element to examine.
cl_autobuy „0“ // The order in which autobuy will attempt to purchase items
cl_autohelp „0“ // Auto-help
cl_autowepswitch „0“ // Automatically switch to picked up weapons (if more powerful)
cl_backspeed „450“
cl_bob „0“
cl_bobamt_lat „0“
cl_bobamt_vert „0“
cl_bobcycle „1“
cl_bobup „0“
cl_bob_lower_amt „21“
cl_brushfastpath „1“
cl_buy_favorite // Purchase a favorite weapon/equipment loadout
cl_buy_favorite_nowarn „0“ // Skips the error prompt when saving an invalid buy favorite
cl_buy_favorite_quiet „0“ // Skips the prompt when saving a buy favorite in the buy menu
cl_buy_favorite_reset // Reset favorite loadouts to the default
cl_buy_favorite_set // Saves the current loadout as a favorite
cl_camera_follow_bone_index „-2“ // Index of the bone to follow. -2 == disabled. -1 == root bone. 0+ is bone index.
cl_chatfilters „63“ // Stores the chat filter settings
cl_class „0“ // Default class when joining a game
cl_clearhinthistory // Clear memory of client side hints displayed to the player.
cl_clockdrift_max_ms „150“ // Maximum number of milliseconds the clock is allowed to drift before the client snaps its clock to the servers.
cl_clockdrift_max_ms_threadmode „0“ // Maximum number of milliseconds the clock is allowed to drift before the client snaps its clock to the servers.
cl_clock_correction „1“ // Enable/disable clock correction on the client.
cl_clock_correction_adjustment_max_amount „200“ // Sets the maximum number of milliseconds per second it is allowed to correct the client clock. It will only correct this amount
cl_clock_correction_adjustment_max_offset „90“ // it moves towards apply
cl_clock_correction_adjustment_min_offset „10“ // then no clock correction is applied.
cl_clock_correction_force_server_tick „999“ // Force clock correction to match the server tick + this offset (-999 disables it).
cl_clock_showdebuginfo „0“ // Show debugging info about the clock drift.
cl_cmdrate „66“ // Max number of command packets sent to server per second
cl_crosshairalpha „255“
cl_crosshaircolor „1“ // Set crosshair color as defined in game_options.360.txt
cl_crosshaircolor_b „250“
cl_crosshaircolor_g „250“
cl_crosshaircolor_r „50“
cl_crosshairdot „0“
cl_crosshairscale „768“ // Crosshair scaling factor (deprecated)
cl_crosshairsize „7“
cl_crosshairthickness „0“
cl_crosshairusealpha „1“
cl_debugrumble „0“ // Turn on rumble debugging spew
cl_detail_avoid_force „0“ // percentage of the width of the detail sprite )
cl_detail_avoid_radius „64“ // radius around detail sprite to avoid players
cl_detail_avoid_recover_speed „0“ // how fast to recover position after avoiding players
cl_detail_max_sway „5“ // Amplitude of the detail prop sway
cl_detail_multiplier „1“ // extra details to create
cl_disablefreezecam „1“ // Turn on/off freezecam on client
cl_disable_ragdolls „0“
cl_downloadfilter „0“ // nosounds)
cl_drawhud „1“ // Enable the rendering of the hud
cl_drawleaf „-1“
cl_drawmaterial „0“ // Draw a particular material over the frame
cl_drawshadowtexture „0“
cl_dumpplayer // Dumps info about a player
cl_dumpsplithacks // Dump split screen workarounds.
cl_dump_particle_stats // dump particle profiling info to particle_profile.csv
cl_dynamiccrosshair „0“
cl_enable_weapon_voiceover „1“ // Enable/Disable weapon name voice over.
cl_entityreport „0“ // draw entity states to console
cl_ent_absbox // Displays the clients absbox for the entity under the crosshair.
cl_ent_bbox // Displays the clients bounding box for the entity under the crosshair.
cl_ent_rbox // Displays the clients render box for the entity under the crosshair.
cl_extrapolate „1“ // Enable/disable extrapolation if interpolation history runs out.
cl_extrapolate_amount „0“ // Set how many seconds the client will extrapolate entities for.
cl_fastdetailsprites „1“ // whether to use new detail sprite system
cl_find_ent // Find and list all client entities with classnames that contain the specified substring. Format: cl_find_ent <substring>
cl_find_ent_index // Display data for clientside entity matching specified index. Format: cl_find_ent_index <index>
cl_fixedcrosshairgap „3“ // How big to make the gap between the pips in the fixed crosshair
cl_flushentitypacket „0“ // For debugging. Force the engine to flush an entity packet.
cl_forcepreload „1“ // Whether we should force preloading.
cl_forwardspeed „450“
cl_fullupdate // Forces the server to send a full update packet
cl_game_mode_convars // Display the values of the convars for the current game_mode.
cl_idealpitchscale „0“
cl_ignorepackets „0“ // Force client to ignore packets (for debugging).
cl_interp „0“ // Sets the interpolation amount (bounded on low side by server interp ratio settings).
cl_interp_ratio „2“ // Sets the interpolation amount (final amount is cl_interp_ratio / cl_updaterate).
cl_jiggle_bone_debug „0“ // Display physics-based jiggle bone debugging information
cl_jiggle_bone_debug_pitch_constraints „0“ // Display physics-based jiggle bone debugging information
cl_jiggle_bone_debug_yaw_constraints „0“ // Display physics-based jiggle bone debugging information
cl_jiggle_bone_invert „0“
cl_lagcompensation „1“ // Perform server side lag compensation of weapon firing events.
cl_language „0“ // Language (from Steam API)
cl_leafsystemvis „0“
cl_leveloverview „0“
cl_leveloverviewmarker „0“
cl_logofile „0“ // Spraypoint logo decal.
cl_maxrenderable_dist „3000“ // Max distance from the camera at which things will be rendered
cl_minimal_rtt_shadows „1“
cl_mouseenable „0“
cl_mouselook „1“ // 0 for keyboard look. Cannot be set while connected to a server.
cl_observercrosshair „1“
cl_overdraw_test „0“
cl_panelanimation // Shows panel animation variables: <panelname | blank for all panels>.
cl_particles_dumplist // optional name substring.
cl_particles_show_bbox „0“
cl_particles_show_controlpoints „0“
cl_particle_retire_cost „0“
cl_pclass „0“ // Dump entity by prediction classname.
cl_pdump „-1“ // Dump info about this entity to screen.
cl_phys_show_active „0“
cl_phys_timescale „1“ // Sets the scale of time for client-side physics (ragdolls)
cl_pitchdown „89“
cl_pitchup „89“
cl_playerspraydisable „1“ // Disable player sprays.
cl_portal_use_new_dissolve „1“ // Use new dissolve effect
cl_precacheinfo // Show precache info (client).
cl_predict „1“ // Perform client side prediction.
cl_predictioncopy_describe // Describe datamap_t for entindex
cl_predictionlist „0“ // Show which entities are predicting
cl_predictweapons „1“ // Perform client side prediction of weapon effects.
cl_pred_track // for field fieldname.
cl_ragdoll_gravity „600“ // Sets the gravity client-side ragdolls
cl_rebuy „0“ // The order in which rebuy will attempt to repurchase items
cl_removedecals // Remove the decals from the entity under the crosshair.
cl_report_soundpatch // reports client-side sound patch count
cl_resend „6“ // Delay in seconds before the client will resend the connect attempt
cl_resend_timeout „60“ // Total time allowed for the client to resend the connect attempt
cl_righthand „1“ // Use right-handed view models.
cl_rumblescale „0“ // Scale sensitivity of rumble effects (0 to 1.0)
cl_scalecrosshair „1“ // Enable crosshair scaling (deprecated)
cl_shadowtextureoverlaysize „256“
cl_showanimstate_activities „0“ // Show activities in the (client) animation state display.
cl_showents // Dump entity list to console.
cl_showerror „0“ // 2 for above plus detailed field deltas.
cl_showevents „0“ // Print event firing info in the console
cl_showfps „0“ // +10 = detailed )
cl_showhelp „0“ // Set to 0 to not show on-screen help
cl_showloadout „1“ // Toggles display of current loadout.
cl_showncustomtabhelp „0“
cl_showpluginmessages „0“ // Allow plugins to display messages to you
cl_showpos „0“ // Draw current position at top of screen
cl_show_scaleform_achievement_popups „1“
cl_sidespeed „450“
cl_skipfastpath „0“ // Set to 1 to stop all models that go through the model fast path from rendering
cl_skipslowpath „0“ // Set to 1 to skip any models that dont go through the model fast path
cl_soundemitter_flush // Flushes the sounds.txt system (server only)
cl_soundemitter_reload // Flushes the sounds.txt system
cl_soundfile „0“ // Jingle sound file.
cl_soundscape_flush // Flushes the client side soundscapes
cl_soundscape_printdebuginfo // print soundscapes
cl_spec_mode „4“ // Saves the last viewed spectator mode for use next time we start to spectate
cl_sporeclipdistance „512“
cl_ss_origin // print origin in script format
cl_steamscreenshots // Enable/disable saving screenshots to Steam
cl_sunlight_ortho_size „0“ // Set to values greater than 0 for ortho view render projections.
cl_sun_decay_rate „0“
cl_team „0“ // Default team when joining a game
cl_timeout „35“ // the client will disconnect itself
cl_tree_sway_dir // sets tree sway wind direction and strength
cl_updaterate „66“ // Number of packets per second of updates you are requesting from the server
cl_updatevisibility // Updates visibility bits.
cl_upspeed „320“
cl_use_new_headbob „1“
cl_view // Set the view entity index.
cl_viewmodel_shift_left_amt „1“
cl_viewmodel_shift_right_amt „0“
cl_winddir „0“ // Weather effects wind direction angle
cl_windspeed „0“ // Weather effects wind speed scalar
cl_wpn_sway_scale „1“
cmd // Forward command to server.
cmd1 // sets userinfo string for split screen player in slot 1
cmd2 // sets userinfo string for split screen player in slot 2
cmd3 // sets userinfo string for split screen player in slot 3
cmd4 // sets userinfo string for split screen player in slot 4
collision_test // Tests collision system
colorcorrectionui // Show/hide the color correction tools UI.
commentary_firstrun „0“
commentary_showmodelviewer // Display the commentary model viewer. Usage: commentary_showmodelviewer <model name> <optional attached model name>
condump // dump the text currently in the console to condumpXX.log
connect // Connect to specified server.
con_enable „1“ // Allows the console to be activated.
crash // Cause the engine to crash (Debug!!)
CreatePredictionError // Create a prediction error
crosshair „1“
cs_make_vip // Marks a player as the VIP
cs_ShowStateTransitions „-2“ // cs_ShowStateTransitions <ent index or -1 for all>. Show player state transitions.
CS_WarnFriendlyDamageInterval „1“ // Defines how frequently the server notifies clients that a player damaged a friend
cursortimeout „60“ // Seconds before mouse cursor hides itself due to inactivity
cvarlist // Show the list of convars/concommands.
c_maxdistance „200“
c_maxpitch „90“
c_maxyaw „135“
c_mindistance „30“
c_minpitch „0“
c_minyaw „-135“
c_orthoheight „100“
c_orthowidth „100“
c_thirdpersonshoulder „0“
c_thirdpersonshoulderaimdist „120“
c_thirdpersonshoulderdist „40“
c_thirdpersonshoulderheight „5“
c_thirdpersonshoulderoffset „20“
dbghist_addline // Add a line to the debug history. Format: <category id> <line>
dbghist_dump // Dump the debug history to the console. Format: <category id> Categories: 0: Entity I/O 1: AI Decisions 2: Sc
debugsystemui // Show/hide the debug system UI.
debug_visibility_monitor „0“
default_fov „90“
demolist // Print demo sequence list.
demos // Demo demo file sequence.
demoui // Show/hide the demo player UI.
demoui2 // Show/hide the advanced demo player UI (demoui2).
demo_gototick // Skips to a tick in demo.
demo_pause // Pauses demo playback.
demo_recordcommands „1“ // Record commands typed at console into .dem files.
demo_resume // Resumes demo playback.
demo_timescale // Sets demo replay speed.
demo_togglepause // Toggles demo playback.
developer „0“ // Set developer message level
devshots_nextmap // Used by the devshots system to go to the next map in the devshots maplist.
devshots_screenshot // use the screenshot command instead.
differences // Show all convars which are not at their default values.
disable_static_prop_loading „0“ // static props wont be loaded
disconnect // Disconnect game from server.
display_elapsedtime // Displays how much time has elapsed since the game started
display_game_events „0“
disp_list_all_collideable // List all collideable displacements
dlight_debug // Creates a dlight in front of the player
drawcross // Draws a cross at the given location Arguments: x y z
drawline // Draws line between two 3D Points. Green if no collision Red is collides with something Arguments: x1 y1 z1 x2 y2 z2
drawradar // Draws HUD radar
dsp_dist_max „1440“
dsp_dist_min „0“
dsp_enhance_stereo „0“
dsp_off „0“
dsp_player „0“
dsp_slow_cpu „1“
dsp_volume „0“
dti_flush // Write out the datatable instrumentation files (you must run with -dti for this to work).
dumpentityfactories // Lists all entity factory names.
dumpeventqueue // Dump the contents of the Entity I/O event queue to the console.
dumpgamestringtable // Dump the contents of the game string table to the console.
dumpstringtables // Print string tables to console.
dump_entity_sizes // Print sizeof(entclass)
dump_globals // Dump all global entities/states
dump_particlemanifest // Dump the list of particles loaded.
echo // Echo text to console.
editdemo // Edit a recorded demo file (.dem ).
editor_toggle // Disables the simulation and returns focus to the editor
enable_debug_overlays „1“ // Enable rendering of debug overlays
enable_skeleton_draw „0“ // Render skeletons in wireframe
endmovie // Stop recording movie frames.
endround // End the current round.
english „1“ // running the english language set of assets.
ent_absbox // Displays the total bounding box for the given entity(s) in green. Some entites will also display entity specific overlays. Ar
ent_attachments // Displays the attachment points on an entity. Arguments: {entity_name} / {class_name} / no argument picks what player is loo
ent_autoaim // Displays the entitys autoaim radius. Arguments: {entity_name} / {class_name} / no argument picks what player is looking at
ent_bbox // Displays the movement bounding box for the given entity(ies) in orange. Some entites will also display entity specific overlay
ent_cancelpendingentfires // Cancels all ent_fire created outputs that are currently waiting for their delay to expire.
ent_create // Creates an entity of the given type where the player is looking.
ent_dump // Usage: ent_dump <entity name>
ent_fire // Usage: ent_fire <target> [action] [value] [delay]
ent_info // Usage: ent_info <class name>
ent_keyvalue // Applies the comma delimited key=value pairs to the entity with the given Hammer ID. Format: ent_keyvalue <entity id> <key1>=<v
ent_messages // Toggles input/output message display for the selected entity(ies). The name of the entity will be displayed as well as any mes
ent_messages_draw „0“ // Visualizes all entity input/output activity.
ent_orient // only orients target entitys YAW. Use the allangles opt
ent_pause // Toggles pausing of input/output message processing for entities. When turned on processing of all message will stop. Any mess
ent_pivot // Displays the pivot for the given entity(ies). (y=up=green, z=forward=blue, x=left=red). Arguments: {entity_name} / {class
ent_rbox // Displays the total bounding box for the given entity(s) in green. Some entites will also display entity specific overlays. Ar
ent_remove // Removes the given entity(s) Arguments: {entity_name} / {class_name} / no argument picks what player is looking at
ent_remove_all // Removes all entities of the specified type Arguments: {entity_name} / {class_name}
ent_rotate // Rotates an entity by a specified # of degrees
ent_script_dump // Dumps the names and values of this entitys script scope to the console Arguments: {entity_name} / {class_name} / no argume
ent_setang // Set entity angles
ent_setname // Sets the targetname of the given entity(s) Arguments: {new entity name} {entity_name} / {class_name} / no argument picks wh
ent_setpos // Move entity to position
ent_show_response_criteria // an entitys current criteria set used to select responses. Arguments: {entity_name} / {class_name} /
ent_step // When ent_pause is set this will step through one waiting input / output message at a time.
ent_teleport // Teleport the specified entity to where the player is looking. Format: ent_teleport <entity name>
ent_text // Displays text debugging information about the given entity(ies) on top of the entity (See Overlay Text) Arguments: {entity_
ent_viewoffset // Displays the eye position for the given entity(ies) in red. Arguments: {entity_name} / {class_name} / no argument picks wha
escape // Escape key pressed.
exec // Execute script file.
execifexists // Execute script file if file exists.
exit // Exit the engine.
explode // Kills the player with explosive damage
explodevector // Kills a player applying an explosive force. Usage: explodevector <player> <x value> <y value> <z value>
fadein // fadein {time r g b}: Fades the screen in from black or from the specified color over the given number of seconds.
fadeout // fadeout {time r g b}: Fades the screen to black or to the specified color over the given number of seconds.
ff_damage_reduction_bullets „0“ // How much to reduce damage done to teammates when shot. Range is from 0 – 1 (with 1 being damage equal to what is done to an en
ff_damage_reduction_grenade „0“ // How much to reduce damage done to teammates by a thrown grenade. Range is from 0 – 1 (with 1 being damage equal to what is don
ff_damage_reduction_grenade_self „1“ // How much to damage a player does to himself with his own grenade. Range is from 0 – 1 (with 1 being damage equal to what is do
ff_damage_reduction_other „0“ // How much to reduce damage done to teammates by things other than bullets and grenades. Range is from 0 – 1 (with 1 being damag
find // Find concommands with the specified string in their name/help text.
findflags // Find concommands by flags.
find_ent // Find and list all entities with classnames or targetnames that contain the specified substring. Format: find_ent <substring>
find_ent_index // Display data for entity matching specified index. Format: find_ent_index <index>
firstperson // Switch to firstperson camera.
fish_debug „0“ // Show debug info for fish
fish_dormant „0“ // Turns off interactive fish behavior. Fish become immobile and unresponsive.
flush // Flush unlocked cache memory.
flush_locked // Flush unlocked and locked cache memory.
fogui // Show/hide fog control UI.
fog_color „-1“
fog_colorskybox „-1“
fog_enable „1“
fog_enableskybox „1“
fog_enable_water_fog „1“
fog_end „-1“
fog_endskybox „-1“
fog_hdrcolorscale „-1“
fog_hdrcolorscaleskybox „-1“
fog_maxdensity „-1“
fog_maxdensityskybox „-1“
fog_override „0“ // Overrides the maps fog settings (-1 populates fog_ vars with maps values)
fog_start „-1“
fog_startskybox „-1“
forcebind // Bind a command to an available key. (forcebind command opt:suggestedKey)
force_audio_english „0“ // Keeps track of whether were forcing english in a localized language.
foundry_engine_get_mouse_control // Give the engine control of the mouse.
foundry_engine_release_mouse_control // Give the control of the mouse back to Hammer.
foundry_select_entity // Select the entity under the crosshair or select entities with the specified name.
foundry_sync_hammer_view // Move Hammers 3D view to the same position as the engines 3D view.
foundry_update_entity // Updates the entitys position/angles when in edit mode
fps_screenshot_frequency „10“ // While the fps is below the threshold we will dump a screen shot this often in seconds (i.e. 10 = screen shot every 10 seconds w
fps_screenshot_threshold „-1“ // Dump a screenshot when the FPS drops below the given value.
fs_clear_open_duplicate_times // Clear the list of files that have been opened.
fs_dump_open_duplicate_times // Set fs_report_long_reads 1 before loading to use this. Prints a list of files that were opened more than once and ~how long was
fs_fios_cancel_prefetches // Cancels all the prefetches in progress.
fs_fios_flush_cache // Flushes the FIOS HDD cache.
fs_fios_prefetch_file // Prefetches a file: </PS3_GAME/USRDIR/filename.bin>. The preftech is medium priority and persistent.
fs_fios_prefetch_file_in_pack // Prefetches a file in a pack: <portal2/models/container_ride/fineDebris_part5.ani>. The preftech is medium priority and non-pers
fs_fios_print_prefetches // Displays all the prefetches currently in progress.
fs_printopenfiles // Show all files currently opened by the engine.
fs_syncdvddevcache // Force the 360 to get updated files that are in your p4 changelist(s) from the host PC when running with -dvddev.
fs_warning_level // Set the filesystem warning level.
func_break_max_pieces „15“
fx_new_sparks „1“ // Use new style sparks.
g15_dumpplayer // Spew player data.
g15_reload // Reloads the Logitech G-15 Keyboard configs.
g15_update_msec „250“ // Logitech G-15 Keyboard update interval.
gameinstructor_dump_open_lessons // Gives a list of all currently open lessons.
gameinstructor_enable „0“ // Display in game lessons that teach new players.
gameinstructor_find_errors „0“ // Set to 1 and the game instructor will run EVERY scripted command to uncover errors.
gameinstructor_reload_lessons // Shuts down all open lessons and reloads them from the script file.
gameinstructor_reset_counts // Resets all display and success counts to zero.
gameinstructor_save_restore_lessons „1“ // Set to 0 to disable save/load of open lesson opportunities in single player.
gameinstructor_verbose „0“ // Set to 1 for standard debugging or 2 (in combo with gameinstructor_verbose_lesson) to show update actions.
gameinstructor_verbose_lesson „0“ // Display more verbose information for lessons have this name.
gamemenucommand // Issue game menu command.
gameui_activate // Shows the game UI
gameui_allowescape // Escape key allowed to hide game UI
gameui_allowescapetoshow // Escape key allowed to show game UI
gameui_hide // Hides the game UI
gameui_preventescape // Escape key doesnt hide game UI
gameui_preventescapetoshow // Escape key doesnt show game UI
getpos // dump position and angles to the console
getpos_exact // dump origin and angles to the console
give // Give item to player. Arguments: <item_name>
givecurrentammo // Give a supply of ammo for current weapon..
global_event_log_enabled „0“ // Enables the global event log system
global_set // 2 = DEAD).
glow_outline_effect_enable „1“ // Enable entity outline glow effects.
glow_outline_width „6“ // Width of glow outline effect in screen space.
gl_clear_randomcolor „0“ // Clear the back buffer to random colors every frame. Helps spot open seams in geometry.
god // Toggle. Player becomes invulnerable.
gods // Toggle. All players become invulnerable.
groundlist // Display ground entity list <index>
g_debug_angularsensor „0“
g_debug_constraint_sounds „0“ // Enable debug printing about constraint sounds.
g_debug_ragdoll_removal „0“
g_debug_ragdoll_visualize „0“
g_debug_trackpather „0“
g_debug_vehiclebase „0“
g_debug_vehicledriver „0“
g_debug_vehicleexit „0“
g_debug_vehiclesound „0“
g_jeepexitspeed „100“
hammer_update_entity // Updates the entitys position/angles when in edit mode
hammer_update_safe_entities // Updates entities in the map that can safely be updated (dont have parents or are affected by constraints). Also excludes entit
heartbeat // Force heartbeat of master servers
help // Find help about a convar/concommand.
hideconsole // Hide the console.
hidehud „0“
hidepanel // Hides a viewport panel <name>
hideradar // Hides HUD radar
hidescores // Forcibly hide score panel
hide_main_menu // Hide the main menu
hide_sf_main_menu // Hide the Scaleform main menu
hostage_debug „0“ // Show hostage AI debug information
hostfile „0“ // The HOST file to load.
hostip „-1062731136.000“ // Host game server ip
hostname „0“ // Hostname for server.
hostport „27015“ // Host game server port
host_flush_threshold „12“ // Memory threshold below which the host should flush caches between server instances
host_map „0“ // Current map name.
host_reset_config // reset config (for testing) with param as splitscreen index.
host_runofftime // Run off some time without rendering/updating sounds
host_sleep „0“ // Force the host to sleep a certain number of milliseconds each frame.
host_timescale „1“ // Prescale the clock by this amount.
host_writeconfig // Store current settings to config.cfg (or specified .cfg file).
host_writeconfig_ss // Store current settings to config.cfg (or specified .cfg file) with first param as splitscreen index.
hud_fastswitch „1“
hud_reloadscheme // Reloads hud layout and animation scripts.
hud_scaling „0“ // Scales hud elements
hud_showtargetid „1“ // Enables display of target names
hud_subtitles // Plays the Subtitles: <filename>
hud_takesshots „0“ // Auto-save a scoreboard screenshot at the end of a map.
hunk_track_allocation_types „1“
hurtme // Hurts the player. Arguments: <health to lose>
incrementvar // Increment specified convar value.
inferno_child_spawn_interval_multiplier „1“ // Amount spawn interval increases for each child
inferno_child_spawn_max_depth „4“
inferno_damage „40“ // Damage per second
inferno_debug „0“
inferno_dlight_spacing „200“ // Inferno dlights are at least this far apart
inferno_flame_lifetime „7“ // Average lifetime of each flame in seconds
inferno_flame_spacing „50“ // Minimum distance between separate flame spawns
inferno_forward_reduction_factor „0“
inferno_friendly_fire_duration „6“ // FF is credited back to the thrower.
inferno_initial_spawn_interval „0“ // Time between spawning flames for first fire
inferno_max_child_spawn_interval „1“ // Largest time interval for child flame spawning
inferno_max_flames „32“ // Maximum number of flames that can be created
inferno_max_range „300“ // Maximum distance flames can spread from their initial ignition point
inferno_per_flame_spawn_duration „5“ // Duration each new flame will attempt to spawn new flames
inferno_scorch_decals „1“
inferno_spawn_angle „45“ // Angular change from parent
inferno_surface_offset „20“
inferno_velocity_decay_factor „0“
inferno_velocity_factor „0“
inferno_velocity_normal_factor „0“
in_forceuser „0“ // Force user input to this split screen player.
ip „0“ // Overrides IP for multihomed hosts
items_game_use_local „1“ // items_game.txt will not be stomped by the GC.
item_show_whitelistable_definitions // Lists the item definitions that can be whitelisted in the item_whitelist.txt file in tournament mode.
joinsplitscreen // join split screen
joystick „0“ // false otherwise.
joy_accelmax „1“
joy_accelscale „0“
joy_advanced „0“
joy_advaxisr „0“
joy_advaxisu „0“
joy_advaxisv „0“
joy_advaxisx „0“
joy_advaxisy „0“
joy_advaxisz „0“
joy_autoaimdampen „0“ // How much to scale user stick input when the gun is pointing at a valid target.
joy_autoaimdampenrange „0“ // The stick range where autoaim dampening is applied. 0 = off
joy_axisbutton_threshold „0“ // Analog axis range before a button press is registered.
joy_cfg_preset „1“
joy_circle_correct „1“
joy_diagonalpov „0“ // too.
joy_display_input „0“
joy_forwardsensitivity „-1“
joy_forwardthreshold „0“
joy_gamma „0“
joy_inverty „0“ // Whether to invert the Y axis of the joystick for looking.
joy_lowend „1“
joy_lowmap „1“
joy_movement_stick „0“ // Which stick controls movement (0 is left stick)
joy_name „0“
joy_no_accel_jump „0“
joy_pitchsensitivity „0“ // joystick pitch sensitivity
joy_pitchthreshold „0“
joy_response_look „0“ // 1=Acceleration Promotion
joy_response_look_pitch „1“ // 1=Acceleration Promotion
joy_response_move „1“ // 1/sensitivity
joy_sensitive_step0 „0“
joy_sensitive_step1 „0“
joy_sensitive_step2 „0“
joy_sidesensitivity „1“
joy_sidethreshold „0“
joy_wingmanwarrior_centerhack „0“ // Wingman warrior centering hack.
joy_wingmanwarrior_turnhack „0“ // Wingman warrior hack related to turn axes.
joy_yawsensitivity „-1“ // joystick yaw sensitivity
joy_yawthreshold „0“
jpeg // Take a jpeg screenshot: jpeg <filename> <quality 1-100>.
kdtree_test // Tests spatial partition for entities queries.
key_findbinding // Find key bound to specified command string.
key_listboundkeys // List bound keys with bindings.
key_updatelayout // Updates game keyboard layout to current windows keyboard setting.
kick // Kick a player by name.
kickid // with a message.
kill // Kills the player with generic damage
killserver // Shutdown the server.
killvector // Kills a player applying force. Usage: killvector <player> <x value> <y value> <z value>
lightcache_maxmiss „2“
lightprobe // Samples the lighting environment. Creates a cubemap and a file indicating the local lighting in a subdirectory called material
light_crosshair // Show texture color at crosshair
linefile // Parses map leak data from .lin file
listdemo // List demo file contents.
listid // Lists banned users.
listip // List IP addresses on the ban list.
listmodels // List loaded models.
listRecentNPCSpeech // Displays a list of the last 5 lines of speech from NPCs.
load // Load a saved game.
locator_split_len „0“
locator_split_maxwide_percent „0“
log // and udp < on | off >.
logaddress_add // Set address and port for remote host <ip:port>.
logaddress_del // Remove address and port for remote host <ip:port>.
logaddress_delall // Remove all udp addresses being logged to
logaddress_list // List all addresses currently being used by logaddress.
log_color // Set the color of a logging channel.
log_dumpchannels // Dumps information about all logging channels.
log_flags // Set the flags on a logging channel.
log_level // Set the spew level of a logging channel.
lookspring „0“
lookstrafe „0“
loopsingleplayermaps „0“
map // Start playing on specified map.
maps // Displays list of maps.
map_background // Runs a map as the background to the main menu.
map_commentary // on a specified map.
map_setbombradius // Sets the bomb radius for the map.
map_showbombradius // Shows bomb radius from the center of each bomb site and planted bomb.
map_showspawnpoints // Shows player spawn points (red=invalid)
mat_accelerate_adjust_exposure_down „40“
mat_aniso_disable „0“ // NOTE: You must change mat_forceaniso after changing this convar for this to take effect
mat_bloomamount_rate „0“
mat_bloom_scalefactor_scalar „0“
mat_bumpbasis „0“
mat_camerarendertargetoverlaysize „128“
mat_colcorrection_forceentitiesclientside „0“ // Forces color correction entities to be updated on the client
mat_configcurrent // show the current video control panel config for the material system
mat_crosshair // Display the name of the material under the crosshair
mat_crosshair_edit // open the material under the crosshair in the editor defined by mat_crosshair_edit_editor
mat_crosshair_explorer // open the material under the crosshair in explorer and highlight the vmt file
mat_crosshair_printmaterial // print the material under the crosshair
mat_crosshair_reloadmaterial // reload the material under the crosshair
mat_debug // Activates debugging spew for a specific material.
mat_debugalttab „0“
mat_debug_bloom „0“
mat_displacementmap „1“
mat_drawflat „0“
mat_drawwater „1“
mat_dynamiclightmaps „0“
mat_dynamicPaintmaps „0“
mat_dynamic_tonemapping „1“
mat_edit // Bring up the material under the crosshair in the editor
mat_exposure_center_region_x „0“
mat_exposure_center_region_y „0“
mat_fastclip „0“
mat_fastnobump „0“
mat_fillrate „0“
mat_forcedynamic „0“
mat_force_bloom „0“
mat_force_tonemap_min_avglum „-1“ // Override. Old default was 3.0
mat_force_tonemap_percent_bright_pixels „-1“ // Override. Old value was 2.0
mat_force_tonemap_percent_target „-1“ // Override. Old default was 60.
mat_force_tonemap_scale „0“
mat_frame_sync_enable „1“
mat_frame_sync_force_texture „0“ // Force frame syncing to lock a managed texture.
mat_fullbright „0“
mat_hdr_enabled // Report if HDR is enabled for debugging
mat_hdr_tonemapscale „1“ // 16 = eyes wide open.
mat_hdr_uncapexposure „0“
mat_hsv „0“
mat_info // Shows material system info
mat_leafvis „0“ // or [3] entire PVS (see mat_leafvis_draw_mask for what
mat_loadtextures „1“
mat_lpreview_mode „-1“
mat_luxels „0“
mat_measurefillrate „0“
mat_monitorgamma „2“ // monitor gamma (typically 2.2 for CRT and 1.7 for LCD)
mat_monitorgamma_tv_enabled „1“
mat_morphstats „0“
mat_norendering „0“
mat_normalmaps „0“
mat_normals „0“
mat_postprocess_enable „1“
mat_powersavingsmode „0“ // Power Savings Mode
mat_proxy „0“
mat_queue_mode „-1“ // 2=queued
mat_queue_priority „1“
mat_reloadallmaterials // Reloads all materials
mat_reloadmaterial // Reloads a single material
mat_reloadtextures // Reloads all textures
mat_remoteshadercompile „0“
mat_rendered_faces_count „0“ // Set to N to count how many faces each model draws each frame and spew the top N offenders from the last 150 frames (use mat_re
mat_rendered_faces_spew // mat_rendered_faces_spew <n> Spew the number of faces rendered for the top N models used this frame (mat_rendered_faces_count
mat_reporthwmorphmemory // Reports the amount of size in bytes taken up by hardware morph textures.
mat_resetdefaults // resets the video config options to their defaults
mat_reversedepth „0“
mat_savechanges // saves current video configuration to the registry
mat_setvideomode // windowed state of the material system
mat_shadercount // display count of all shaders and reset that count
mat_showcamerarendertarget „0“
mat_showframebuffertexture „0“
mat_showlowresimage „0“
mat_showmaterials // Show materials.
mat_showmaterialsverbose // Show materials (verbose version).
mat_showmiplevels „0“ // 1: everything else
mat_showtextures // Show used textures.
mat_showwatertextures „0“
mat_show_texture_memory_usage „0“ // Display the texture memory usage on the HUD.
mat_softwareskin „0“
mat_spewalloc „0“
mat_spewvertexandpixelshaders // Print all vertex and pixel shaders currently loaded to the console
mat_stub „0“
mat_suppress // Supress a material from drawing
mat_surfaceid „0“
mat_surfacemat „0“
mat_tessellationlevel „6“
mat_tessellation_accgeometrytangents „0“
mat_tessellation_cornertangents „1“
mat_tessellation_update_buffers „1“
mat_texture_list_content_path „0“ // itll assume your content directory is next to the currently runn
mat_texture_list_exclude // save – saves exclude list file
mat_texture_list_txlod // -1 to dec resolution
mat_texture_list_txlod_sync // save – saves all changes to material content files
mat_tonemap_algorithm „1“ // 0 = Original Algorithm 1 = New Algorithm
mat_updateconvars // updates the video config convars
mat_viewportscale „1“ // Scale down the main viewport (to reduce GPU impact on CPU profiling)
mat_wireframe „0“
mat_yuv „0“
maxplayers // Change the maximum number of players allowed on this server.
mc_accel_band_size „34“ // (degrees)
mc_aim_heading_multiplier „1“
mc_aim_pitch_multiplier „1“
mc_dead_zone_radius „10“ // (degrees)
mc_max_turnrate „210“ // (degrees/sec)
memory // Print memory stats.
mem_dump // Dump memory stats to text file.
mem_dumpvballocs // Dump VB memory allocation stats.
mem_incremental_compact_rate „0“ // Rate at which to attempt internal heap compation
mem_vcollide // Dumps the memory used by vcollides
mem_verify // Verify the validity of the heap
menuselect // menuselect
minisave // Saves game (for current level only!)
mm_datacenter_debugprint // Shows information retrieved from data center
mm_debugprint // Show debug information about current matchmaking session
mm_dedicated_force_servers „0“ // Comma delimited list of ip:port of servers used to search for dedicated servers instead of searching for public servers. Use sy
mm_dedicated_search_maxping „150“ // Longest preferred ping to dedicated servers for games
mm_dlc_debugprint // Shows information about dlc
mm_server_search_lan_ports „27015“ // Ports to scan during LAN games discovery. Also used to discover and correctly connect to dedicated LAN servers behind NATs.
mod_DumpWeaponWiewModelCache // Dumps the weapon view model cache contents
mod_DumpWeaponWorldModelCache // Dumps the weapon world model cache contents
motdfile „0“ // The MOTD file to load.
movie_fixwave // etc.
mp_afterroundmoney „0“ // amount of money awared to every player after each round
mp_autokick „1“ // Kick idle/team-killing players
mp_buytime „90“ // How many seconds after round start players can buy items for.
mp_death_drop_defuser „1“ // Drop defuser on player death
mp_death_drop_grenade „2“ // 2=current or best
mp_death_drop_gun „1“ // 2=current or best
mp_defuser_allocation „0“ // 2=everyone
mp_disable_autokick // Prevents a userid from being auto-kicked
mp_dump_timers // Prints round timers to the console for debugging
mp_forcerespawnplayers // Force all players to respawn.
mp_forcewin // Forces team to win
mp_force_pick_time „10“ // The amount of time a player has on the team screen to make a selection before being auto-teamed
mp_freezetime „6“ // how many seconds to keep players frozen when the round starts
mp_ggprogressive_round_restart_delay „15“ // Number of seconds to delay before restarting a round after a win in gungame progessive
mp_ggtr_bomb_detonation_bonus „1“ // Number of bonus upgrades to award the Ts when they detonate a gun game bomb
mp_halftime_duration „15“ // Number of seconds that halftime lasts
mp_join_grace_time „20“ // Number of seconds after round start to allow a player to join a game
mp_limitteams „2“ // Max # of players 1 team can have over another (0 disables check)
mp_match_end_restart „1“ // perform a restart instead of loading a new map
mp_maxmoney „16000“ // maximum amount of money allowed in a players account
mp_playercashawards „1“ // Players can earn money by performing in-game actions
mp_playerid „0“ // Controls what information player see in the status bar: 0 all names; 1 team names; 2 no names
mp_playerid_delay „0“ // Number of seconds to delay showing information in the status bar
mp_playerid_hold „0“ // Number of seconds to keep showing old information in the status bar
mp_required_voters „3“ // The number of human players required for a vote
mp_required_vote_majority „0“ // The percentage of human players that need to vote yes for a vote to pass
mp_restartgame „0“ // game will restart in the specified number of seconds
mp_roundtime „5“ // How many minutes each round takes.
mp_round_restart_delay „7“ // Number of seconds to delay before restarting a round after a win
mp_scrambleteams // Scramble the teams and restart the game
mp_startmoney „800“ // amount of money each player gets when they reset
mp_switchteams // Switch teams and restart the game
mp_teamcashawards „1“ // Teams can earn money by performing in-game actions
mp_tkpunish „0“ // 1=yes}
mp_tournament_restart // Restart Tournament Mode on the current level.
mp_win_panel_display_time „5“ // The amount of time to show the win panel between matches / halfs
ms_player_dump_properties // Prints a dump the current players property data
multvar // Multiply specified convar value.
muzzleflash_light „1“
m_customaccel „0“ // Custom mouse acceleration: 0: custom accelaration disabled 1: mouse_acceleration = min(m_customaccel_max, pow(raw_mouse_delta,
m_customaccel_exponent „1“ // Mouse move is raised to this power before being scaled by scale factor.
m_customaccel_max „0“ // 0 for no limit
m_customaccel_scale „0“ // Custom mouse acceleration value.
m_forward „1“ // Mouse forward factor.
m_mouseaccel1 „0“ // Windows mouse acceleration initial threshold (2x movement).
m_mouseaccel2 „0“ // Windows mouse acceleration secondary threshold (4x movement).
m_mousespeed „1“ // 2 to enable secondary threshold
m_pitch „0“ // Mouse pitch factor.
m_rawinput „0“ // Use Raw Input for mouse input.
m_side „0“ // Mouse side factor.
m_yaw „0“ // Mouse yaw factor.
name „0“ // Current user name
nav_add_to_selected_set // Add current area to the selected set.
nav_add_to_selected_set_by_id // Add specified area id to the selected set.
nav_analyze // Re-analyze the current Navigation Mesh and save it to disk.
nav_area_bgcolor „503316480“ // RGBA color to draw as the background color for nav areas while editing.
nav_area_max_size „50“ // Max area size created in nav generation
nav_avoid // Toggles the avoid this area when possible flag used by the AI system.
nav_begin_area // drag the opposite corner to the desired location and
nav_begin_deselecting // Start continuously removing from the selected set.
nav_begin_drag_deselecting // Start dragging a selection area.
nav_begin_drag_selecting // Start dragging a selection area.
nav_begin_selecting // Start continuously adding to the selected set.
nav_begin_shift_xy // Begin shifting the Selected Set.
nav_build_ladder // Attempts to build a nav ladder on the climbable surface under the cursor.
nav_check_connectivity // Checks to be sure every (or just the marked) nav area can get to every goal area for the map (hostages or bomb site).
nav_check_file_consistency // Scans the maps directory and reports any missing/out-of-date navigation files.
nav_check_floor // Updates the blocked/unblocked status for every nav area.
nav_check_stairs // Update the nav mesh STAIRS attribute
nav_chop_selected // Chops all selected areas into their component 1×1 areas
nav_clear_attribute // Remove given nav attribute from all areas in the selected set.
nav_clear_selected_set // Clear the selected set.
nav_clear_walkable_marks // Erase any previously placed walkable positions.
nav_compress_id // Re-orders area and ladder IDs so they are continuous.
nav_connect // then invoke the connect command. Note that this creates a
nav_coplanar_slope_limit „0“
nav_coplanar_slope_limit_displacement „0“
nav_corner_adjust_adjacent „18“ // radius used to raise/lower corners in nearby areas when raising/lowering corners.
nav_corner_lower // Lower the selected corner of the currently marked Area.
nav_corner_place_on_ground // Places the selected corner of the currently marked Area on the ground.
nav_corner_raise // Raise the selected corner of the currently marked Area.
nav_corner_select // Select a corner of the currently marked Area. Use multiple times to access all four corners.
nav_create_area_at_feet „0“ // Anchor nav_begin_area Z to editing players feet
nav_create_place_on_ground „0“ // nav areas will be placed flush with the ground when created by hand.
nav_crouch // Toggles the must crouch in this area flag used by the AI system.
nav_debug_blocked „0“
nav_delete // Deletes the currently highlighted Area.
nav_delete_marked // Deletes the currently marked Area (if any).
nav_disconnect // then invoke the disconnect command. This will remove all connec
nav_displacement_test „10000“ // Checks for nodes embedded in displacements (useful for in-development maps)
nav_dont_hide // Toggles the area is not suitable for hiding spots flag used by the AI system.
nav_draw_limit „500“ // The maximum number of areas to draw in edit mode
nav_edit „0“ // Set to one to interactively edit the Navigation Mesh. Set to zero to leave edit mode.
nav_end_area // Defines the second corner of a new Area or Ladder and creates it.
nav_end_deselecting // Stop continuously removing from the selected set.
nav_end_drag_deselecting // Stop dragging a selection area.
nav_end_drag_selecting // Stop dragging a selection area.
nav_end_selecting // Stop continuously adding to the selected set.
nav_end_shift_xy // Finish shifting the Selected Set.
nav_flood_select // use this command again.
nav_generate // Generate a Navigation Mesh for the current map and save it to disk.
nav_generate_fencetops „1“ // Autogenerate nav areas on fence and obstacle tops
nav_generate_fixup_jump_areas „1“ // Convert obsolete jump areas into 2-way connections
nav_generate_incremental // Generate a Navigation Mesh for the current map and save it to disk.
nav_generate_incremental_range „2000“
nav_generate_incremental_tolerance „0“ // Z tolerance for adding new nav areas.
nav_gen_cliffs_approx // post-processing approximation
nav_jump // Toggles the traverse this area by jumping flag used by the AI system.
nav_ladder_flip // Flips the selected ladders direction.
nav_load // Loads the Navigation Mesh for the current map.
nav_lower_drag_volume_max // Lower the top of the drag select volume.
nav_lower_drag_volume_min // Lower the bottom of the drag select volume.
nav_make_sniper_spots // Chops the marked area into disconnected sub-areas suitable for sniper spots.
nav_mark // Marks the Area or Ladder under the cursor for manipulation by subsequent editing commands.
nav_mark_attribute // Set nav attribute for all areas in the selected set.
nav_mark_unnamed // Mark an Area with no Place name. Useful for finding stray areas missed when Place Painting.
nav_mark_walkable // Mark the current location as a walkable position. These positions are used as seed locations when sampling the map to generate
nav_max_view_distance „0“ // Maximum range for precomputed nav mesh visibility (0 = default 1500 units)
nav_max_vis_delta_list_length „64“
nav_merge // and invoke the merge comm
nav_merge_mesh // Merges a saved selected set into the current mesh.
nav_no_hostages // Toggles the hostages cannot use this area flag used by the AI system.
nav_no_jump // Toggles the dont jump in this area flag used by the AI system.
nav_place_floodfill // and flood-fills the Place to all adjacent Areas. Flood-filli
nav_place_list // Lists all place names used in the map.
nav_place_pick // Sets the current Place to the Place of the Area under the cursor.
nav_place_replace // Replaces all instances of the first place with the second place.
nav_place_set // Sets the Place of all selected areas to the current Place.
nav_potentially_visible_dot_tolerance „0“
nav_precise // Toggles the dont avoid obstacles flag used by the AI system.
nav_quicksave „0“ // Set to one to skip the time consuming phases of the analysis. Useful for data collection and testing.
nav_raise_drag_volume_max // Raise the top of the drag select volume.
nav_raise_drag_volume_min // Raise the bottom of the drag select volume.
nav_recall_selected_set // Re-selects the stored selected set.
nav_remove_from_selected_set // Remove current area from the selected set.
nav_remove_jump_areas // replacing them with connections.
nav_run // Toggles the traverse this area by running flag used by the AI system.
nav_save // Saves the current Navigation Mesh to disk.
nav_save_selected // Writes the selected set to disk for merging into another mesh via nav_merge_mesh.
nav_selected_set_border_color „-16751516“ // Color used to draw the selected set borders while editing.
nav_selected_set_color „1623785472.000“ // Color used to draw the selected set background while editing.
nav_select_blocked_areas // Adds all blocked areas to the selected set
nav_select_damaging_areas // Adds all damaging areas to the selected set
nav_select_half_space // Selects any areas that intersect the given half-space.
nav_select_invalid_areas // Adds all invalid areas to the Selected Set.
nav_select_obstructed_areas // Adds all obstructed areas to the selected set
nav_select_overlapping // Selects nav areas that are overlapping others.
nav_select_radius // Adds all areas in a radius to the selection set
nav_select_stairs // Adds all stairway areas to the selected set
nav_set_place_mode // Sets the editor into or out of Place mode. Place mode allows labelling of Area with Place names.
nav_shift // Shifts the selected areas by the specified amount
nav_show_approach_points „0“ // Show Approach Points in the Navigation Mesh.
nav_show_area_info „0“ // Duration in seconds to show nav area ID and attributes while editing
nav_show_compass „0“
nav_show_continguous „0“ // Highlight non-contiguous connections
nav_show_danger „0“ // Show current danger levels.
nav_show_light_intensity „0“
nav_show_nodes „0“
nav_show_node_grid „0“
nav_show_node_id „0“
nav_show_player_counts „0“ // Show current player counts in each area.
nav_show_potentially_visible „0“ // Show areas that are potentially visible from the current nav area
nav_simplify_selected // Chops all selected areas into their component 1×1 areas and re-merges them together into larger areas
nav_slope_limit „0“ // The ground unit normals Z component must be greater than this for nav areas to be generated.
nav_slope_tolerance „0“ // The ground unit normals Z component must be this close to the nav areas Z component to be generated.
nav_snap_to_grid „0“ // Snap to the nav generation grid when creating new nav areas
nav_solid_props „0“ // Make props solid to nav generation/editing
nav_splice // connected area between them.
nav_split // align the split line using your cursor and invoke the split command.
nav_split_place_on_ground „0“ // nav areas will be placed flush with the ground when split.
nav_stand // Toggles the stand while hiding flag used by the AI system.
nav_stop // Toggles the must stop when entering this area flag used by the AI system.
nav_store_selected_set // Stores the current selected set for later retrieval.
nav_strip // and Encounter Spots from the current Area.
nav_subdivide // Subdivides all selected areas.
nav_test_node „0“
nav_test_node_crouch „0“
nav_test_node_crouch_dir „4“
nav_test_stairs // Test the selected set for being on stairs
nav_toggle_deselecting // Start or stop continuously removing from the selected set.
nav_toggle_in_selected_set // Remove current area from the selected set.
nav_toggle_place_mode // Toggle the editor into and out of Place mode. Place mode allows labelling of Area with Place names.
nav_toggle_place_painting // pointing at an Area will paint it with the current Place.
nav_toggle_selected_set // Toggles all areas into/out of the selected set.
nav_toggle_selecting // Start or stop continuously adding to the selected set.
nav_transient // Toggles the area is transient and may become blocked flag used by the AI system.
nav_unmark // Clears the marked Area or Ladder.
nav_update_blocked // Updates the blocked/unblocked status for every nav area.
nav_update_lighting // Recomputes lighting values
nav_update_visibility_on_edit „0“ // If nonzero editing the mesh will incrementally recompue visibility
nav_use_place // the current Place is set.
nav_walk // Toggles the traverse this area by walking flag used by the AI system.
nav_warp_to_mark // Warps the player to the marked area.
nav_world_center // Centers the nav mesh in the world
net_allow_multicast „1“
net_blockmsg „0“ // Discards incoming message: <0|1|name>
net_channels // Shows net channel info
net_droppackets „0“ // Drops next n packets on client
net_dumpeventstats // Dumps out a report of game event network usage
net_earliertempents „1“
net_fakejitter „0“ // Jitter fakelag packet time
net_fakelag „0“ // Lag all incoming network data (including loopback) by this many milliseconds.
net_fakeloss „0“ // Simulate packet loss as a percentage (negative means drop 1/n packets)
net_graph „1“ // = 3 draws payload legend.
net_graphheight „64“ // Height of netgraph panel
net_graphmsecs „400“ // The latency graph represents this many milliseconds.
net_graphpos „2“
net_graphproportionalfont „1“ // Determines whether netgraph font is proportional or not
net_graphshowinterp „1“ // Draw the interpolation graph.
net_graphshowlatency „1“ // Draw the ping/packet loss graph.
net_graphsolid „1“
net_graphtext „1“ // Draw text fields
net_maxroutable „1200“ // Requested max packet size before packets are split.
net_public_adr „0“ // this is the public facing ip address string: (x.x.x.x
net_scale „5“
net_showreliablesounds „0“
net_showsplits „0“ // Show info about packet splits
net_showudp „0“ // Dump UDP packets summary to console
net_showudp_oob „0“ // Dump OOB UDP packets summary to console
net_showudp_remoteonly „0“ // Dump non-loopback udp only
net_splitpacket_maxrate „15000“ // Max bytes per second when queueing splitpacket chunks
net_splitrate „1“ // Number of fragments for a splitpacket that can be sent per frame
net_start // Inits multiplayer network sockets
net_status // Shows current network status
net_steamcnx_allowrelay „1“ // Allow steam connections to attempt to use relay servers as fallback (best if specified on command line: +net_steamcnx_allowrel
net_steamcnx_enabled „1“ // 2 forces use of steam connections instead of raw UDP.
net_steamcnx_status // Print status of steam connection sockets.
next „0“ // Set to 1 to advance to next frame ( when singlestep == 1 )
nextdemo // Play next demo in sequence.
noclip // Toggle. Player becomes non-solid and flies. Optional argument of 0 or 1 to force enable/disable
noclip_fixup „1“
notarget // Toggle. Player becomes hidden to NPCs.
npc_ally_deathmessage „1“
npc_ammo_deplete // Subtracts half of the targets ammo
npc_bipass // s
npc_combat // Displays text debugging information about the squad and enemy of the selected NPC (See Overlay Text) Arguments: {npc_name}
npc_conditions // Displays all the current AI conditions that an NPC has in the overlay text. Arguments: {npc_name} / {npc class_name} / no a
npc_create // Creates an NPC of the given type where the player is looking (if the given NPC can actually stand at that location). Argumen
npc_create_aimed // Creates an NPC aimed away from the player of the given type where the player is looking (if the given NPC can actually stand at
npc_destroy // Removes the given NPC(s) from the universe Arguments: {npc_name} / {npc_class_name} / no argument picks what player is looki
npc_destroy_unselected // Removes all NPCs from the universe that arent currently selected
npc_enemies // Shows memory of NPC. Draws an X on top of each memory. Eluded entities drawn in blue (dont know where it went) Unreachable
npc_focus // Displays red line to NPCs enemy (if has one) and blue line to NPCs target entity (if has one) Arguments: {npc_name} / {np
npc_freeze // uses the NPC under the crosshair. Arguments
npc_freeze_unselected // Freeze all NPCs not selected
npc_go // Selected NPC(s) will go to the location that the player is looking (shown with a purple box) Arguments: -none-
npc_go_random // Sends all selected NPC(s) to a random node. Arguments: -none-
npc_heal // Heals the target back to full health
npc_height_adjust „1“ // Enable test mode for ik height adjustment
npc_kill // Kills the given NPC(s) Arguments: {npc_name} / {npc_class_name} / no argument picks what player is looking at
npc_nearest // Draws a while box around the NPC(s) nearest node Arguments: {entity_name} / {class_name} / no argument picks what player i
npc_relationships // Displays the relationships between this NPC and all others. Arguments: {entity_name} / {class_name} / no argument picks wha
npc_reset // Reloads schedules for all NPCs from their script files Arguments: -none-
npc_route // Displays the current route of the given NPC as a line on the screen. Waypoints along the route are drawn as small cyan rectang
npc_select // Select or deselects the given NPC(s) for later manipulation. Selected NPCs are shown surrounded by a red translucent box Arg
npc_set_freeze // uses the NPC under the crosshair. Arguments
npc_set_freeze_unselected // Freeze all NPCs not selected
npc_squads // Obsolete. Replaced by npc_combat
npc_steering // Displays the steering obstructions of the NPC (used to perform local avoidance) Arguments: {entity_name} / {class_name} / n
npc_steering_all // Displays the steering obstructions of all NPCs (used to perform local avoidance)
npc_tasks // Displays detailed text debugging information about the all the tasks of the selected NPC current schedule (See Overlay Text) A
npc_task_text // Outputs text debugging information to the console about the all the tasks + break conditions of the selected NPC current schedu
npc_teleport // Selected NPC will teleport to the location that the player is looking (shown with a purple box) Arguments: -none-
npc_thinknow // Trigger NPC to think
npc_viewcone // Displays the viewcone of the NPC (where they are currently looking and what the extents of there vision is) Arguments: {ent
option_duck_method „0“
option_speed_method „0“
paintsplat_bias „0“ // Change bias value for computing circle buffer
paintsplat_max_alpha_noise „0“ // Max noise value of circle alpha
paintsplat_noise_enabled „1“
panel_test_title_safe „0“ // Test vgui panel positioning with title safe indentation
particle_simulateoverflow „0“ // Used for stress-testing particle systems. Randomly denies creation of particles.
particle_test_attach_attachment „0“ // Attachment index for attachment mode
particle_test_attach_mode „0“ // follow_origin
particle_test_file „0“ // Name of the particle system to dynamically spawn
particle_test_start // particle_test_attach_mode and particl
particle_test_stop // Stops all particle systems on the selected entities. Arguments: {entity_name} / {class_name} / no argument picks what playe
password „0“ // Current server access password
path // Show the engine filesystem path.
pause // Toggle the server pause state.
perfui // Show/hide the level performance tools UI.
physics_budget // Times the cost of each active object
physics_constraints // Highlights constraint system graph for an entity
physics_debug_entity // Dumps debug info for an entity
physics_highlight_active // Turns on the absbox for all active physics objects
physics_report_active // Lists all active physics objects
physics_select // Dumps debug info for an entity
phys_debug_check_contacts „0“
phys_show_active „0“
picker // pivot and debugging text is displayed for whatever entity the play
ping // Display ping to server.
pingserver // Ping a server for info
pixelvis_debug // Dump debug info
play // Play a sound.
playdemo // Play a recorded demo file (.dem ).
player_botdifflast_s „0“
player_classplayedlast „0“
player_debug_print_damage „0“ // print amount and type of all damage received by player to console.
player_gamemodelast_m „0“
player_gamemodelast_s „1“
player_gametypelast_m „0“
player_gametypelast_s „0“
player_last_leaderboards_filter „0“ // Last mode setting in the Leaderboards screen
player_last_leaderboards_mode „0“ // Last mode setting in the Leaderboards screen
player_last_leaderboards_panel „0“ // Last opened panel in the Leaderboards screen
player_last_medalstats_access_time1 „0“ // Last year/month/day we accessed this screen – packed as a uint32 of year:16-month:8-day:8
player_last_medalstats_access_time2 „0“ // Last hour/min/sec we accessed this screen – packed as a uint32 of hour:8-min:8-sec:8
player_last_medalstats_category „0“ // Last selected category on the Medals panel in the Medals & Stats screen
player_last_medalstats_panel „0“ // Last opened panel in the Medals & Stats screen
player_maplast_m „0“
player_maplast_s „1“
player_mmprivacylast_m „0“
player_teamplayedlast „3“
playflush // reloading from disk in case of changes.
playgamesound // Play a sound from the game sounds txt file
playsoundscape // Forces a soundscape to play
playvideo // Plays a video: <filename> [width height]
playvideo_end_level_transition // Plays a video fullscreen without ability to skip (unless dev 1) and fades in: <filename> <time>
playvideo_exitcommand // Plays a video and fires and exit command when it is stopped or finishes: <filename> <exit command>
playvideo_exitcommand_nointerrupt // Plays a video (without interruption) and fires and exit command when it is stopped or finishes: <filename> <exit command>
playvideo_nointerrupt // Plays a video without ability to skip: <filename> [width height]
playvol // Play a sound at a specified volume.
plugin_load // plugin_load <filename> : loads a plugin
plugin_pause // plugin_pause <index> : pauses a loaded plugin
plugin_pause_all // pauses all loaded plugins
plugin_print // Prints details about loaded plugins
plugin_unload // plugin_unload <index> : unloads a plugin
plugin_unpause // plugin_unpause <index> : unpauses a disabled plugin
plugin_unpause_all // unpauses all disabled plugins
post_jump_crouch „0“ // This determines how long the player character will crouch for after landing a jump. This only affects the third person animati
press_x360_button // d[own])
print_colorcorrection // Display the color correction layer information.
prop_crosshair // Shows name for prop looking at
prop_debug // props will show colorcoded bounding boxes. Red means ignore all damage. White means respond phys
prop_dynamic_create // Creates a dynamic prop with a specific .mdl aimed away from where the player is looking. Arguments: {.mdl name}
prop_physics_create // Creates a physics prop with a specific .mdl aimed away from where the player is looking. Arguments: {.mdl name}
pwatchent „-1“ // Entity to watch for prediction system changes.
pwatchvar „0“ // Entity variable to watch in prediction system for changes.
quit // Exit the engine.
radarvisdistance „1000“ // at this distance and beyond you need to be point right at someone to see them
radarvismaxdot „0“ // how closely you have to point at someone to see them beyond max distance
radarvismethod „1“ // 1 for more realistic method
radarvispow „0“ // and still see them on radar.
radio1 // Opens a radio menu
radio2 // Opens a radio menu
radio3 // Opens a radio menu
rate „20000“ // Max bytes/sec the host can receive data
rcon // Issue an rcon command.
rcon_address „0“ // Address of remote server if sending unconnected rcon commands (format x.x.x.x:p)
rcon_password „0“ // remote console password.
rebuy // Attempt to repurchase items with the order listed in cl_rebuy
recompute_speed // Recomputes clock speed (for debugging purposes).
record // Record a demo.
reload // Reload the most recent saved game (add setpos to jump to current view position on reload).
reload_vjobs // reload vjobs module
remote_bug // Starts a bug report with data from the currently connected rcon machine
removeid // Remove a user ID from the ban list.
removeip // Remove an IP address from the ban list.
render_blanks // render N blank frames
report_cliententitysim „0“ // List all clientside simulations and time – will report and turn itself off.
report_clientthinklist „0“ // List all clientside entities thinking and time – will report and turn itself off.
report_entities // Lists all entities
report_simthinklist // Lists all simulating/thinking entities
report_soundpatch // reports sound patch count
report_touchlinks // Lists all touchlinks
reset_expo // and end the round
reset_gameconvars // Reset a bunch of game convars to default values
respawn_entities // Respawn all the entities in the map.
restart // Restart the game on the same level (add setpos to jump to current view position on restart).
rope_min_pixel_diameter „2“
rr_debugresponseconcept_exclude // Set a list of concepts to exclude from rr_debugresponseconcept. Separate multiple concepts with spaces. Call with no arguments
rr_followup_maxdist „1800“ // then ANY or then ALL response followups will be dispatched only to characters within this distance.
rr_forceconcept // fire a response concept directly at a given character. USAGE: rr_forceconcept <target> <concept> criteria1:value1,criteria2:va
rr_reloadresponsesystems // Reload all response system scripts.
rr_remarkables_enabled „0“ // polling for info_remarkables and issuances of TLK_REMARK is enabled.
rr_remarkable_max_distance „1200“ // AIs will not even consider remarkarbles that are more than this many units away.
rr_remarkable_world_entities_replay_limit „1“ // TLK_REMARKs will be dispatched no more than this many times for any given info_remarkable
rr_thenany_score_slop „0“ // all rule-matching scores within this much of the best score will be considere
r_AirboatViewDampenDamp „1“
r_AirboatViewDampenFreq „7“
r_AirboatViewZHeight „0“
r_alphafade_usefov „1“ // Account for FOV when computing an entitys distance-based alpha fade
r_ambientfraction „0“ // Fraction of direct lighting used to boost lighting when model requests
r_ambientlightingonly „0“ // Set this to 1 to light models with only ambient lighting (and no static lighting).
r_avglight „1“
r_avglightmap „0“
r_brush_queue_mode „0“
r_cleardecals // Usage r_cleardecals <permanent>.
r_ClipAreaFrustums „1“
r_ClipAreaPortals „1“
r_colorstaticprops „0“
r_debugcheapwater „0“
r_debugrandomstaticlighting „0“ // Set to 1 to randomize static lighting for debugging. Must restart for change to take affect.
r_depthoverlay „0“ // Replaces opaque objects with their grayscaled depth values. r_showz_power scales the output.
r_DispBuildable „0“
r_DispWalkable „0“
r_dlightsenable „1“
r_drawallrenderables „0“ // even ones inside solid leaves.
r_DrawBeams „1“ // 2=Wireframe
r_drawbrushmodels „1“ // 2=Wireframe
r_drawclipbrushes „0“ // purple=NPC)
r_drawdecals „1“ // Render decals.
r_DrawDisp „1“ // Toggles rendering of displacment maps
r_drawentities „1“
r_drawfuncdetail „1“ // Render func_detail
r_drawleaf „-1“ // Draw the specified leaf.
r_drawlightcache „0“ // 0: off 1: draw light cache entries 2: draw rays
r_drawlightinfo „0“
r_drawlights „0“
r_DrawModelLightOrigin „0“
r_drawmodelstatsoverlay „0“
r_drawmodelstatsoverlaydistance „500“
r_drawmodelstatsoverlayfilter „-1“
r_drawmodelstatsoverlaymax „1“ // time in milliseconds beyond which a model overlay is fully red in r_drawmodelstatsoverlay 2
r_drawmodelstatsoverlaymin „0“ // time in milliseconds that a model must take to render before showing an overlay in r_drawmodelstatsoverlay 2
r_drawopaquerenderables „1“
r_drawopaqueworld „1“
r_drawothermodels „1“ // 2=Wireframe
r_drawparticles „1“ // Enable/disable particle rendering
r_DrawPortals „0“
r_DrawRain „1“ // Enable/disable rain rendering.
r_drawrenderboxes „0“ // (0 – off) (1 – Draws the bounding box of entities) (2 – Draws the axis aligned bounding box used for culling) (3 – draws both b
r_drawropes „1“
r_drawscreenoverlay „0“
r_drawskybox „1“
r_drawsprites „1“
r_drawstaticprops „1“ // 2=Wireframe
r_drawtracers „1“
r_drawtranslucentrenderables „1“
r_drawtranslucentworld „1“
r_drawunderwateroverlay „0“
r_drawvgui „1“ // Enable the rendering of vgui panels
r_drawviewmodel „1“
r_drawworld „1“ // Render the world.
r_dscale_basefov „90“
r_dscale_fardist „2000“
r_dscale_farscale „4“
r_dscale_neardist „100“
r_dscale_nearscale „1“
r_dynamic „1“
r_dynamiclighting „1“
r_eyegloss „0“
r_eyemove „0“
r_eyeshift_x „0“
r_eyeshift_y „0“
r_eyeshift_z „0“
r_eyesize „0“
r_eyewaterepsilon „7“
r_farz „-1“ // Override the far clipping plane. -1 means to use the value in env_fog_controller.
r_flashlightambient „0“
r_flashlightbacktraceoffset „0“
r_flashlightbrightness „0“
r_flashlightclip „0“
r_flashlightconstant „0“
r_flashlightdrawclip „0“
r_flashlightfar „750“
r_flashlightfov „53“
r_flashlightladderdist „40“
r_flashlightlinear „100“
r_flashlightlockposition „0“
r_flashlightmuzzleflashfov „120“
r_flashlightnear „4“
r_flashlightnearoffsetscale „1“
r_flashlightoffsetforward „0“
r_flashlightoffsetright „5“
r_flashlightoffsetup „-5“
r_flashlightquadratic „0“
r_flashlightscissor „0“
r_flashlightshadowatten „0“
r_flashlightvisualizetrace „0“
r_flushlod // Flush and reload LODs.
r_hwmorph „0“
r_itemblinkmax „0“
r_itemblinkrate „4“
r_JeepFOV „90“
r_JeepViewBlendTo „1“
r_JeepViewBlendToScale „0“
r_JeepViewBlendToTime „1“
r_JeepViewDampenDamp „1“
r_JeepViewDampenFreq „7“
r_JeepViewZHeight „10“
r_lightcachecenter „1“
r_lightcachemodel „-1“
r_lightcache_numambientsamples „162“ // number of random directions to fire rays when computing ambient lighting
r_lightcache_radiusfactor „1000“ // Allow lights to influence lightcaches beyond the lights radii
r_lightinterp „5“ // 0 turns off interpolation
r_lightmap „-1“
r_lightstyle „-1“
r_lightwarpidentity „0“
r_lockpvs „0“ // Lock the PVS so you can fly around and inspect what is being drawn.
r_mapextents „16384“ // Set the max dimension for the map. This determines the far clipping plane
r_modelAmbientMin „0“ // Minimum value for the ambient lighting on dynamic models with more than one bone (like players and their guns).
r_modelwireframedecal „0“
r_nohw „0“
r_nosw „0“
r_novis „0“ // Turn off the PVS.
r_occlusionspew „0“ // Activate/deactivates spew about what the occlusion system is doing.
r_oldlightselection „0“ // Set this to revert to HL2s method of selecting lights
r_particle_demo „0“
r_partition_level „-1“ // Displays a particular level of the spatial partition system. Use -1 to disable it.
r_portalsopenall „0“ // Open all portals
r_PortalTestEnts „1“ // Clip entities against portal frustums.
r_proplightingpooling „-1“ // 1 – static prop color meshes are allocated from a single shared vertex buffer (on hardware that supports stream offset
r_radiosity „4“ // 0: no radiosity 1: radiosity with ambient cube (6 samples) 2: radiosity with 162 samples 3: 162 samples for static props, 6 sam
r_rainalpha „0“
r_rainalphapow „0“
r_RainCheck „0“ // Enable/disable IsInAir() check for rain drops?
r_RainDebugDuration „0“ // Shows rain tracelines for this many seconds (0 disables)
r_raindensity „0“
r_RainHack „0“
r_rainlength „0“
r_RainProfile „0“ // Enable/disable rain profiling.
r_RainRadius „1500“
r_RainSideVel „130“ // How much sideways velocity rain gets.
r_RainSimulate „1“ // Enable/disable rain simulation.
r_rainspeed „600“
r_RainSplashPercentage „20“
r_rainwidth „0“
r_randomflex „0“
r_rimlight „1“
r_screenoverlay // Draw specified material as an overlay
r_shadowangles // Set shadow angles
r_shadowblobbycutoff // some shadow stuff
r_shadowcolor // Set shadow color
r_shadowdir // Set shadow direction
r_shadowdist // Set shadow distance
r_shadowfromanyworldlight „0“
r_shadowfromworldlights_debug „0“
r_shadowids „0“
r_shadows_gamecontrol „-1“
r_shadowwireframe „0“
r_shadow_debug_spew „0“
r_shadow_deferred „0“ // Toggle deferred shadow rendering
r_showenvcubemap „0“
r_showz_power „1“
r_skin „0“
r_skybox „1“ // Enable the rendering of sky boxes
r_slowpathwireframe „0“
r_SnowDebugBox „0“ // Snow Debug Boxes.
r_SnowEnable „1“ // Snow Enable
r_SnowEndAlpha „255“ // Snow.
r_SnowEndSize „0“ // Snow.
r_SnowFallSpeed „1“ // Snow fall speed scale.
r_SnowInsideRadius „256“ // Snow.
r_SnowOutsideRadius „1024“ // Snow.
r_SnowParticles „500“ // Snow.
r_SnowPosScale „1“ // Snow.
r_SnowRayEnable „1“ // Snow.
r_SnowRayLength „8192“ // Snow.
r_SnowRayRadius „256“ // Snow.
r_SnowSpeedScale „1“ // Snow.
r_SnowStartAlpha „25“ // Snow.
r_SnowStartSize „1“ // Snow.
r_SnowWindScale „0“ // Snow.
r_SnowZoomOffset „384“ // Snow.
r_SnowZoomRadius „512“ // Snow.
r_swingflashlight „1“
r_updaterefracttexture „1“
r_vehicleBrakeRate „1“
r_VehicleViewClamp „1“
r_VehicleViewDampen „1“
r_visocclusion „0“ // Activate/deactivate wireframe rendering of what the occlusion system is doing.
r_visualizelighttraces „0“
r_visualizelighttracesshowfulltrace „0“
r_visualizetraces „0“
safezonex „1“ // The percentage of the screen width that is considered safe from overscan
safezoney „1“ // The percentage of the screen height that is considered safe from overscan
save // Saves current game.
say // Display player message
say_team // Display player message to team
scene_flush // Flush all .vcds from the cache and reload from disk.
scene_playvcd // Play the given VCD as an instanced scripted scene.
scene_showfaceto „0“ // show the directions of faceto events.
scene_showlook „0“ // show the directions of look events.
scene_showmoveto „0“ // show the end location.
scene_showunlock „0“ // Show when a vcd is playing but normal AI is running.
screenshot // Take a screenshot.
script // Run the text as a script
script_client // Run the text as a script
script_debug // Connect the vscript VM to the script debugger
script_debug_client // Connect the vscript VM to the script debugger
script_dump_all // Dump the state of the VM to the console
script_dump_all_client // Dump the state of the VM to the console
script_execute // Run a vscript file
script_execute_client // Run a vscript file
script_help // optionally with a search string
script_help_client // optionally with a search string
script_reload_code // replacing existing functions with the functions in the run script
script_reload_entity_code // replacing existing functions with the functions in the run scripts
script_reload_think // replacing existing functions with the functions in the run script
sensitivity „1“ // Mouse sensitivity.
server_game_time // Gives the game time in seconds (servers curtime)
setang // Snap player eyes to specified pitch yaw <roll:optional> (must have sv_cheats).
setang_exact // Snap player eyes and orientation to specified pitch yaw <roll:optional> (must have sv_cheats).
setinfo // Adds a new user info value
setmodel // Changess players model
setpause // Set the pause state of the server.
setpos // Move player to specified origin (must have sv_cheats).
setpos_exact // Move player to an exact specified origin (must have sv_cheats).
setpos_player // Move specified player to specified origin (must have sv_cheats).
sfcrosshair „0“
sf_ui_tint „1“ // The current tint applied to the Scaleform UI
shake // Shake the screen.
shake_stop // Stops all active screen shakes.
shake_testpunch // Test a punch-style screen shake.
showbudget_texture „0“ // Enable the texture budget panel.
showbudget_texture_global_dumpstats // Dump all items in +showbudget_texture_global in a text form
showconsole // Show the console.
showpanel // Shows a viewport panel <name>
showtriggers „0“ // Shows trigger brushes
showtriggers_toggle // Toggle show triggers
show_loadout_toggle // Toggles loadout display
show_main_menu // Show the main menu
show_sf_main_menu // Show the Scaleform main menu
singlestep „0“ // Run engine in single step mode ( set next to 1 to advance a frame )
sixense_aim_1to1_heading_multiplier „3“
sixense_aim_1to1_pitch_multiplier „3“
sixense_aim_1to1_ratchet_vertical „1“
sixense_aim_freeaim_accel_band_exponent „1“
sixense_aim_freeaim_accel_band_size „15“
sixense_aim_freeaim_auto_level_rate „1“
sixense_aim_freeaim_dead_zone_radius „0“
sixense_aim_freeaim_heading_multiplier „1“
sixense_aim_freeaim_max_speed „12“
sixense_aim_freeaim_pitch_multiplier „1“
sixense_aim_freeaim_switch_blend_time_enter „0“
sixense_aim_freeaim_switch_blend_time_exit „0“
sixense_aim_scope_heading_multiplier „0“
sixense_aim_scope_pitch_multiplier „0“
sixense_always_draw_crosshair „1“
sixense_base_offset_x „0“
sixense_base_offset_y „0“
sixense_base_offset_z „-20“
sixense_bind // Bind a concommand to a button.
sixense_clear_bindings // Clear all sixense bindings.
sixense_controller_angle_mode „0“
sixense_create_default_bindings // Erase all current bindings and load the default bindings for this game.
sixense_crosshair_horiz_multiplier „1“
sixense_crosshair_vert_multiplier „1“
sixense_crouch_sensitivity „1“
sixense_delete_binding // Delete a single binding by index.
sixense_enabled „0“
sixense_exit_metroid_blend „0“
sixense_exit_one_to_one_dot „0“
sixense_feet_angles_offset_stick_spin_exponent „1“
sixense_feet_angles_offset_stick_spin_horiz_multiplier „7“
sixense_feet_angles_offset_stick_spin_invert_pitch „1“
sixense_feet_angles_offset_stick_spin_vert_multiplier „4“
sixense_filter_level „0“
sixense_jump_sensitivity „1“
sixense_left_handed „0“
sixense_list_bindings // List the sixense bindings.
sixense_max_charge_spin „3“
sixense_melee_pitch_blend_val „0“
sixense_mode „0“
sixense_mouse_enabled „1“
sixense_mouse_sensitivity „1“
sixense_point_gesture_angle_threshold „15“
sixense_reload_sensitivity „1“
sixense_roll_correct_blend „0“
sixense_sensitivity_level „2“
sixense_show_frame // Show/hide Sixense UI.
sixense_spring_view_enabled „1“
sixense_spring_view_max_angle „45“
sixense_spring_view_max_spring „0“
sixense_spring_view_min_angle „1“
sixense_spring_view_min_spring „0“
sixense_teleport_metroid_blend_time „3“
sixense_teleport_wait_to_blend_time „0“
sixense_tilt_gesture_angle_threshold „35“
sixense_trigger_threshold „0“
sixense_walking_dead_zone_percent „10“
sixense_walking_exponent „1“
sixense_weapon_select_sensitivity „1“
sixense_write_bindings // Save the sixense bindings to a file.
sixense_zoom_momentary_time „500“
skill „1“ // Game skill level (1-3).
skip_next_map // Skips the next map in the map rotation for the server.
sk_autoaim_mode „1“
snd_async_flush // Flush all unlocked async audio data
snd_async_showmem // Show async memory stats
snd_async_showmem_music // Show async memory stats for just non-streamed music
snd_async_showmem_summary // Show brief async memory stats
snd_duckerattacktime „0“
snd_duckerreleasetime „2“
snd_duckerthreshold „0“
snd_ducking_off „1“
snd_ducktovolume „0“
snd_dumpclientsounds // Dump sounds to console
snd_filter „0“
snd_foliage_db_loss „4“ // foliage dB loss per 1200 units
snd_gain „1“
snd_gain_max „1“
snd_gain_min „0“
snd_getmixer // Get data related to mix group matching string
snd_legacy_surround „0“
snd_mixahead „0“
snd_musicvolume „0“ // Music volume
snd_mute_losefocus „1“
snd_obscured_gain_dB „-2“
snd_op_test_convar „1“
snd_pause_all „1“ // Specifies to pause all sounds and not just voice
snd_pitchquality „1“
snd_playsounds // Play sounds from the game sounds txt file at a given location
snd_prefetch_common „1“ // Prefetch common sounds from directories specified in scripts/sound_prefetch.txt
snd_pre_gain_dist_falloff „1“
snd_print_channels // Prints all the active channel.
snd_print_channel_by_guid // Prints the content of a channel from its guid. snd_print_channel_by_guid <guid>.
snd_print_channel_by_index // Prints the content of a channel from its index. snd_print_channel_by_index <index>.
snd_print_dsp_effect // Prints the content of a dsp effect.
snd_rebuildaudiocache // rebuild audio cache for current language
snd_refdb „60“ // Reference dB at snd_refdist
snd_refdist „36“ // Reference distance for snd_refdb
snd_restart // Restart sound system.
snd_setmixer // solo.
snd_setmixlayer // solo.
snd_setmixlayer_amount // Set named mix layer mix amount.
snd_setsoundparam // Set a sound paramater
snd_set_master_volume // Sets the master volume for a channel. snd_set_master_volume <guid> <mastervolume>.
snd_showstart „0“
snd_sos_flush_operators // Flush and re-parse the sound operator system
snd_sos_list_operator_updates „0“
snd_sos_show_client_xmit „0“
snd_sos_show_operator_entry_filter „0“
snd_sos_show_operator_init „0“
snd_sos_show_operator_prestart „0“
snd_sos_show_operator_shutdown „0“
snd_sos_show_operator_start „0“
snd_sos_show_operator_stop_entry „0“
snd_sos_show_operator_updates „0“
snd_sos_show_queuetotrack „0“
snd_sos_show_server_xmit „0“
snd_sos_show_startqueue „0“
snd_soundmixer_flush // Reload soundmixers.txt file.
snd_soundmixer_list_mixers // List all mixers to dev console.
snd_soundmixer_list_mix_groups // List all mix groups to dev console.
snd_soundmixer_list_mix_layers // List all mix layers to dev console.
snd_soundmixer_set_trigger_factor // trigger amount.
snd_updateaudiocache // checks _master.cache based on file sizes and rebuilds any change/new entries
snd_visualize „0“ // Show sounds location in world
snd_writemanifest // outputs the precache manifest for the current level
soundfade // Fade client volume.
soundinfo // Describe the current sound device.
soundlist // List all known sounds.
soundscape_debug „0“ // red lines show soundscapes that ar
soundscape_dumpclient // Dumps the clients soundscape data.
soundscape_fadetime „3“ // Time to crossfade sound effects between soundscapes
soundscape_flush // Flushes the server & client side soundscapes
soundscape_radius_debug „0“ // Prints current volume of radius sounds
speak // Play a constructed sentence.
spec_freeze_cinematiclight_b „1“
spec_freeze_cinematiclight_g „1“
spec_freeze_cinematiclight_r „1“
spec_freeze_cinematiclight_scale „2“
spec_freeze_deathanim_time „0“ // The time that the death cam will spend watching the players ragdoll before going into the freeze death cam.
spec_freeze_distance_max „80“ // Maximum random distance from the target to stop when framing them in observer freeze cam.
spec_freeze_distance_min „60“ // Minimum random distance from the target to stop when framing them in observer freeze cam.
spec_freeze_target_fov „42“ // The target FOV that the deathcam should use.
spec_freeze_target_fov_long „90“ // The target FOV that the deathcam should use when the cam zoom far away on the target.
spec_freeze_time „5“ // Time spend frozen in observer freeze cam.
spec_freeze_traveltime „0“ // Time taken to zoom in to frame a target in observer freeze cam.
spec_freeze_traveltime_long „0“ // Time taken to zoom in to frame a target in observer freeze cam when they are far away.
spec_gui // Shows or hides the spectator bar
spec_menu // Activates spectator menu
spec_pos // dump position and angles to the console
spike // generates a fake spike
ss_enable „0“ // Enables Split Screen support. Play Single Player now launches into split screen mode. NO ONLINE SUPPORT
ss_map // Start playing on specified map with max allowed splitscreen players.
ss_reloadletterbox // ss_reloadletterbox
ss_splitmode „0“ // 2 – vertical (only allowed in widescr
startdemos // Play demos in demo sequence.
startmovie // Start recording movie frames.
startupmenu // and were not in developer
star_memory // Dump memory stats
stats // Prints server performance variables
status // Display map and connection status.
stop // Finish recording demo.
stopdemo // Stop playing back a demo.
stopsoundscape // Stops all soundscape processing and fades current looping sounds
stopvideos // Stops all videos playing to the screen
stopvideos_fadeout // Fades out all videos playing to the screen: <time>
stop_transition_videos_fadeout // Fades out all transition videos playing to the screen: <time>
stringtabledictionary // Create dictionary for current strings.
stuffcmds // Parses and stuffs command line + commands to command buffer.
suitvolume „0“
surfaceprop // Reports the surface properties at the cursor
sv_accelerate „10“
sv_allow_lobby_connect_only „0“ // may not connect directly.
sv_allow_wait_command „1“ // Allow or disallow the wait command on clients connected to this server.
sv_alltalk „0“ // no team restrictions
sv_alternateticks „1“ // server only simulates entities on even numbered ticks.
sv_benchmark_force_start // Force start the benchmark. This is only for debugging. Its better to set sv_benchmark to 1 and restart the level.
sv_cheats „0“ // Allow cheats on server
sv_clearhinthistory // Clear memory of server side hints displayed to the player.
sv_consistency „0“ // Whether the server enforces file consistency for critical files
sv_contact „0“ // Contact email for server sysop
sv_deadtalk „0“ // text) to the living
sv_downloadurl „0“ // Location from which clients can download missing files
sv_dumpstringtables „0“
sv_forcepreload „1“ // Force server side preloading.
sv_friction „4“ // World friction.
sv_full_alltalk „0“ // Any player (including Spectator team) can speak to any other player
sv_gameinstructor_disable „0“ // Force all clients to disable their game instructors.
sv_game_mode_convars // Display the values of the convars for the current game_mode.
sv_infinite_ammo „0“ // Players active weapon will never run out of ammo
sv_lagcompensationforcerestore „1“ // just do it.
sv_lan „0“ // no non-class C addresses )
sv_logbans „0“ // Log server bans in the server logs.
sv_logecho „1“ // Echo log information to the console.
sv_logfile „1“ // Log server information in the log file.
sv_logflush „0“ // Flush the log file to disk on each write (slow).
sv_logsdir „0“ // Folder in the game directory where server logs will be stored.
sv_log_onefile „0“ // Log server information to only one file.
sv_maxcmdrate „102“ // this sets the maximum value for cl_cmdrate.
sv_maxrate „0“ // 0 == unlimited
sv_memlimit „0“ // the server will exit.
sv_mincmdrate „10“ // This sets the minimum value for cl_cmdrate. 0 == unlimited.
sv_minrate „5000“ // 0 == unlimited
sv_noclipaccelerate „5“
sv_noclipduringpause „0“ // etc.).
sv_noclipspeed „5“
sv_password „0“ // Server password for entry into multiplayer games
sv_pausable „0“ // Is the server pausable.
sv_precacheinfo // Show precache info.
sv_pure // Show user data.
sv_pure_kick_clients „1“ // it will issue a warning to the client.
sv_pure_trace „0“ // the server will print a message whenever a client is verifying a CRC for a file.
sv_pushaway_hostage_force „20000“ // How hard the hostage is pushed away from physics objects (falls off with inverse square of distance).
sv_pushaway_max_hostage_force „1000“ // Maximum of how hard the hostage is pushed away from physics objects.
sv_pvsskipanimation „1“ // Skips SetupBones when npcs are outside the PVS
sv_querycache_stats // Display status of the query cache (client only)
sv_regeneration_force_on „0“ // Cheat to test regenerative health systems
sv_region „-1“ // The region of the world to report this server in.
sv_reservation_timeout „45“ // Time in seconds before lobby reservation expires.
sv_search_key „0“ // restrict search to only dedicated servers having the same sv_search_key.
sv_search_team_key „0“ // set this key to match with known opponents team
sv_showlagcompensation „0“ // Show lag compensated hitboxes whenever a player is lag compensated.
sv_showtags // Describe current gametags.
sv_shutdown // Sets the server to shutdown when all games have completed
sv_skyname „0“ // Current name of the skybox texture
sv_soundemitter_reload // Flushes the sounds.txt system
sv_soundscape_printdebuginfo // print soundscapes
sv_specaccelerate „5“
sv_specnoclip „1“
sv_specspeed „3“
sv_steamgroup „0“ // The ID of the steam group that this server belongs to. You can find your groups ID on the admin profile page in the steam comm
sv_steamgroup_exclusive „0“ // public people will be able to join the ser
sv_tags „0“ // Server tags. Used to provide extra information to clients when theyre browsing for servers. Separate tags with a comma.
sv_timescale // Change the speed of the game.
sv_unlockedchapters „1“ // Highest unlocked game chapter.
sv_visiblemaxplayers „-1“ // Overrides the max players reported to prospective clients
sv_voiceenable „1“
sys_antialiasing „0“ // Convar used exclusively by the options screen to set anti aliasing levels. Changing this convar manually will have no effect.
sys_aspectratio „-1“ // Convar used exclusively by the options screen to set aspect ratio. Changing this convar manually will have no effect.
sys_minidumpspewlines „500“ // Lines of crash dump console spew to keep.
sys_refldetail „0“ // Convar used exclusively by the options screen to set water reflection levels. Changing this convar manually will have no effect
sys_vsync „0“ // Convar used exclusively by the options screen to set vsync. Changing this convar manually will have no effect.
teammenu // Show team selection window
testhudanim // Test a hud element animation. Arguments: <anim name>
test_dispatcheffect // Test a clientside dispatch effect. Usage: test_dispatcheffect <effect name> <distance away> <flags> <magnitude> <scale> Defau
test_entity_blocker // Test command that drops an entity blocker out in front of the player.
test_freezeframe // Test the freeze frame code.
Test_Loop // Test_Loop <loop name> – loop back to the specified loop start point unconditionally.
Test_LoopCount // Test_LoopCount <loop name> <count> – loop back to the specified loop start point the specified # of times.
Test_LoopForNumSeconds // Test_LoopForNumSeconds <loop name> <time> – loop back to the specified start point for the specified # of seconds.
Test_ProxyToggle_EnsureValue // Test_ProxyToggle_EnsureValue
Test_RandomChance // 0-100> <token1> <token2…> – Roll the dice and maybe run the command following the percenta
Test_StartLoop // Test_StartLoop <loop name> – Denote the start of a loop. Really just defines a named point you can jump to.
Test_StartScript // Start a test script running..
texture_budget_background_alpha „128“ // how translucent the budget panel is
texture_budget_panel_bottom_of_history_fraction „0“ // number between 0 and 1
texture_budget_panel_height „284“ // height in pixels of the budget panel
texture_budget_panel_width „512“ // width in pixels of the budget panel
texture_budget_panel_x „0“ // number of pixels from the left side of the game screen to draw the budget panel
texture_budget_panel_y „450“ // number of pixels from the top side of the game screen to draw the budget panel
tf_escort_score_rate „1“ // in points per second
think_limit „10“ // warning is printed if this is exceeded.
thirdperson // Switch to thirdperson camera.
thirdpersonshoulder // Switch to thirdperson-shoulder camera.
thirdperson_mayamode // Switch to thirdperson Maya-like camera controls.
threadpool_cycle_reserve // Cycles threadpool reservation by powers of 2
timedemo // Play a demo and report performance info.
timedemoquit // and then exit
timedemo_vprofrecord // Play a demo and report performance info. Also record vprof data for the span of the demo
timeleft // prints the time remaining in the match
timerefresh // Profile the renderer.
toggle // or cycles through a set of values.
toggleconsole // Show/hide the console.
togglescores // Toggles score panel
toolload // Load a tool.
toolunload // Unload a tool.
tv_clients // Shows list of connected SourceTV clients.
tv_msg // Send a screen message to all clients.
tv_nochat „0“ // Dont receive chat messages from other SourceTV spectators
tv_port „27020“ // Host SourceTV port
tv_record // Starts SourceTV demo recording.
tv_relay // Connect to SourceTV server and relay broadcast.
tv_retry // Reconnects the SourceTV relay proxy.
tv_status // Show SourceTV server status.
tv_stop // Stops the SourceTV broadcast.
tv_stoprecord // Stops SourceTV demo recording.
tweak_ammo_impulses // Allow real-time tweaking of the ammo impulse values.
ui_posedebug_fade_in_time „0“ // Time during which a new pose activity layer is shown in green in +posedebug UI
ui_posedebug_fade_out_time „0“ // Time to keep a no longer active pose activity layer in red until removing it from +posedebug UI
ui_reloadscheme // Reloads the resource files for the active UI window
unbind // Unbind a key.
unbindall // Unbind all keys.
unbindalljoystick // Unbind all joystick keys.
unbindallmousekeyboard // Unbind all mouse / keyboard keys.
unload_all_addons // Reloads the search paths for game addons.
unpause // Unpause the game.
update_addon_paths // Reloads the search paths for game addons.
use // Use a particular weapon Arguments: <weapon_name>
user // Show user data.
users // Show user info for players on server.
vcollide_wireframe „0“ // Render physics collision models in wireframe
vehicle_flushscript // Flush and reload all vehicle scripts
version // Print version info string.
vgui_drawtree „0“ // Draws the vgui panel hiearchy to the specified depth level.
vgui_dump_panels // vgui_dump_panels [visible]
vgui_message_dialog_modal „1“
vgui_togglepanel // show/hide vgui panel by name.
viewanim_create // viewanim_create
viewanim_load // load animation from file
viewanim_reset // reset view angles!
viewanim_save // Save current animation to file
viewanim_test // test view animation
viewmodel_fov „54“
viewmodel_offset_x „0“
viewmodel_offset_y „0“
viewmodel_offset_z „0“
vismon_poll_frequency „0“
vismon_trace_limit „12“
vis_force „0“
vm_debug „0“
vm_draw_always „0“ // 2 – Never draw view models. Should be done before map launches.
voice_enable „1“ // Toggle voice transmit and receive.
voice_forcemicrecord „1“
voice_inputfromfile „0“ // Get voice input from voice_input.wav rather than from the microphone.
voice_loopback „0“
voice_mixer_boost „0“
voice_mixer_mute „0“
voice_mixer_volume „1“
voice_modenable „1“ // Enable/disable voice in this mod.
voice_mute // Mute a specific Steam user
voice_player_speaking_delay_threshold „0“
voice_recordtofile „0“ // Record mic data and decompressed voice data into voice_micdata.wav and voice_decompressed.wav
voice_reset_mutelist // Reset all mute information for all players who were ever muted.
voice_scale „1“
voice_show_mute // Show whether current players are muted.
voice_threshold „2000“
voice_unmute // or `all` to unmute all connected players.
volume „1“ // Sound volume
voxeltree_box // Vector(max)>.
voxeltree_playerview // View entities in the voxel-tree at the player position.
voxeltree_sphere // float(radius)>.
voxeltree_view // View entities in the voxel-tree.
vox_reload // Reload sentences.txt file
vphys_sleep_timeout // set sleep timeout: large values mean stuff wont ever sleep
vprof // Toggle VProf profiler
vprof_adddebuggroup1 // add a new budget group dynamically for debugging
vprof_cachemiss // Toggle VProf cache miss checking
vprof_cachemiss_off // Turn off VProf cache miss checking
vprof_cachemiss_on // Turn on VProf cache miss checking
vprof_collapse_all // Collapse the whole vprof tree
vprof_dump_counters // Dump vprof counters to the console
vprof_dump_groupnames // Write the names of all of the vprof groups to the console.
vprof_expand_all // Expand the whole vprof tree
vprof_expand_group // Expand a budget group in the vprof tree by name
vprof_generate_report // Generate a report to the console.
vprof_generate_report_AI // Generate a report to the console.
vprof_generate_report_AI_only // Generate a report to the console.
vprof_generate_report_budget // Generate a report to the console based on budget group.
vprof_generate_report_hierarchy // Generate a report to the console.
vprof_generate_report_hierarchy_per_frame_and_count_only // Generate a minimal hiearchical report to the console.
vprof_generate_report_map_load // Generate a report to the console.
vprof_graphheight „256“
vprof_graphwidth „512“
vprof_off // Turn off VProf profiler
vprof_on // Turn on VProf profiler
vprof_playback_average // Average the next N frames.
vprof_playback_start // Start playing back a recorded .vprof file.
vprof_playback_step // step to the next tick.
vprof_playback_stepback // step to the previous tick.
vprof_playback_stop // Stop playing back a recorded .vprof file.
vprof_record_start // Start recording vprof data for playback later.
vprof_record_stop // Stop recording vprof data
vprof_remote_start // Request a VProf data stream from the remote server (requires authentication)
vprof_remote_stop // Stop an existing remote VProf data request
vprof_reset // Reset the stats in VProf profiler
vprof_reset_peaks // Reset just the peak time in VProf profiler
vprof_to_csv // Convert a recorded .vprof file to .csv.
vprof_unaccounted_limit „0“ // number of milliseconds that a node must exceed to turn red in the vprof panel
vprof_verbose „1“ // Set to one to show average and peak times
vprof_vtune_group // enable vtune for a particular vprof group (disable to disable)
vprof_warningmsec „10“ // Above this many milliseconds render the label red to indicate slow code.
vtune // Controls VTunes sampling.
vx_model_list // Dump models to VXConsole
wc_air_edit_further // moves position of air node crosshair and placement location further away from play
wc_air_edit_nearer // moves position of air node crosshair and placement location nearer to from player
wc_air_node_edit // toggles laying down or air nodes instead of ground nodes
wc_create // creates a node where the player is looking if a node is allowed at that location for the currently select
wc_destroy // destroys the node that the player is nearest to looking at. (The node will be highlighted by a red box).
wc_destroy_undo // When in WC edit mode restores the last deleted node
weapon_debug_spread_gap „0“
weapon_debug_spread_show „0“ // 3: show accuracy with dynamic crosshair
windows_speaker_config „6“
wipe_nav_attributes // Clear all nav attributes of selected area.
writeid // Writes a list of permanently-banned user IDs to banned_user.cfg.
writeip // Save the ban list to banned_ip.cfg.
xbox_autothrottle „1“
xbox_throttlebias „100“
xbox_throttlespoof „200“
xload // Load a saved game from a console storage device.
xsave // Saves current game to a console storage device.
zoom_sensitivity_ratio_joystick „0“ // Additional controller sensitivity scale factor applied when FOV is zoomed in.
zoom_sensitivity_ratio_mouse „1“ // Additional mouse sensitivity scale factor applied when FOV is zoomed in.
_autosave // Autosave
_autosavedangerous // AutoSaveDangerous
_bugreporter_restart // Restarts bug reporter .dll
_record // Record a demo incrementally.
_resetgamestats // Erases current game stats and writes out a blank stats file
_restart // Shutdown and restart the engine.


Kommentar verfassen

Trage deine Daten unten ein oder klicke ein Icon um dich einzuloggen:

Du kommentierst mit Deinem Abmelden /  Ändern )

Google+ Foto

Du kommentierst mit Deinem Google+-Konto. Abmelden /  Ändern )


Du kommentierst mit Deinem Twitter-Konto. Abmelden /  Ändern )


Du kommentierst mit Deinem Facebook-Konto. Abmelden /  Ändern )

Verbinde mit %s